285354-2025 - Wettbewerb
Dänemark – Laborgeräte, optische Geräte und Präzisionsgeräte (außer Gläser) – tender for a batch spray tool
OJ S 85/2025 02/05/2025
Auftrags- oder Konzessionsbekanntmachung – Standardregelung
Lieferleistungen
1. Beschaffer
1.1.
Beschaffer
Offizielle BezeichnungDanmarks Tekniske Universitet - DTU
E-Mailmihaiv@dtu.dk
Rechtsform des ErwerbersEinrichtung des öffentlichen Rechts
Tätigkeit des öffentlichen AuftraggebersBildung
2. Verfahren
2.1.
Verfahren
Titeltender for a batch spray tool
BeschreibungDTU Nanolab requires one spray tool equipped with ozone, HF, HCl and NH4OH for wafer cleaning purposes. The tool is to be able to handle batch processing (up to 25 wafers per run). The tool will be used in our ISO 14644-1 Class 4 and 5 clean room. The tool will be used by many different users with diverse backgrounds, which means that operator safety is an important aspect. Another important aspect is the ease of use with special attention on software operation and setup change for different wafer sizes. Please see Appendix 1 Requirement specification for further information.
Kennung des Verfahrens18754cf1-01c6-4d2d-bd89-430d4e5b9e41
Interne Kennung9868
VerfahrensartOffenes Verfahren
Das Verfahren wird beschleunigtnein
2.1.1.
Zweck
Art des AuftragsLieferleistungen
Haupteinstufung (cpv): 38000000 Laborgeräte, optische Geräte und Präzisionsgeräte (außer Gläser)
2.1.2.
Erfüllungsort
Land, Gliederung (NUTS)Københavns omegn (DK012)
LandDänemark
2.1.3.
Wert
Geschätzter Wert ohne MwSt.1 100 000,00 EUR
2.1.4.
Allgemeine Informationen
Zusätzliche InformationenParticipation in the tender procedure may only take place by electronic means via the electronic tendering system used by the contracting entity. For access to the tender documents, the tenderer must be registered or register as a user. If the tender contains several versions of the same document, the latest uploaded version will apply. All communication in connection with the tender procedure, including questions and answers, must take place through the electronic tendering system. Reference is made to the Instruction to Tenderers for information concerning questions and answers. Tenderers are requested to keep updated via the electronic tendering system. If the tenderer encounters problems with the system, please contact support by e-mail, dksupport@eu-supply.com, or telephone (+45) 70 20 80 14. Section 134a of the Danish Public Procurement Act shall apply to this tender procedure. The tenderer must submit an ESPD with the tender as preliminary documentation of the circumstances set out in section 148(1), paras (1)-(3) of the Danish Public Procurement Act. It is not necessary for the tenderer to sign the ESPD document. For groups of operators (e.g., a consortium), a separate ESPD must be submitted for each participating operator. Where the tenderer is a group of operators, the ESPD document of each participant in the group must be signed by the participant in question. The tenderer heading the group and submitting the tender is not required to sign its ESPD document. If the tenderer relies on the capacities of other entities, an ESPD must be submitted for and signed by each of the entities on which the tenderer relies. Before the award decision is made, the tenderer to whom the contracting entity intends to award the contract must provide documentation of the information submitted in the ESPD pursuant to sections 151-152, cf. section 153 of the Danish Public Procurement Act or pursuant to section 156, see the Instruction to tenderers The contracting entity may use the procedure of section 159(5) of the Danish Public Procurement Act in the event that tenders do not comply with the requirements of the tender documents. Attention is drawn to Article 5k in Regulation (EU) No 833/2014 as amended which applies to the tender procedure. Tenderers must sign a declaration regarding Regulation (EU) no 833/2014 as amended.
Rechtsgrundlage
Richtlinie 2014/24/EU
The Danish Public Procurement Act -
2.1.6.
Ausschlussgründe
Der Zahlungsunfähigkeit vergleichbare Lage gemäß nationaler Rechtsvorschriftencf. the Danish Public Procurement Act section 137 (1), para 2
Konkurscf. the Danish Public Procurement Act section 137 (1), para 2
Korruptioncf. the Danish Public Procurement Act section 135 (1), para 2
Vergleichsverfahrencf. the Danish Public Procurement Act section 137 (1), para 2
Beteiligung an einer kriminellen Vereinigungcf. the Danish Public Procurement Act section 135 (1), para 1
Geldwäsche oder Terrorismusfinanzierungcf. the Danish Public Procurement Act section 135 (1), para 5
Betrugsbekämpfungcf. the Danish Public Procurement Act section 135 (1), para 3
Kinderarbeit und andere Formen des Menschenhandelscf. the Danish Public Procurement Act section 135 (1), para 6
Zahlungsunfähigkeitcf. the Danish Public Procurement Act section 137 (1), para 2
Verwaltung der Vermögenswerte durch einen Insolvenzverwaltercf. the Danish Public Procurement Act section 137 (1), para 2
Falsche Angaben, verweigerte Informationen, die nicht in der Lage sind, die erforderlichen Unterlagen vorzulegen, und haben vertrauliche Informationen über dieses Verfahren erhalten.cf. the Danish Public Procurement Act section 136 (3)
Interessenkonflikt aufgrund seiner Teilnahme an dem Vergabeverfahrencf. the Danish Public Procurement Act section 136 (1)
Direkte oder indirekte Beteiligung an der Vorbereitung des Vergabeverfahrenscf. the Danish Public Procurement Act section 136 (2)
Schwere Verfehlung im Rahmen der beruflichen Tätigkeitcf. the Danish Public Procurement Act section 136 (4)
Zahlung der Sozialversicherungsbeiträgecf. the Danish Public Procurement Act section 135 (3)
Einstellung der gewerblichen Tätigkeitcf. the Danish Public Procurement Act section 137 (1), para 2
Entrichtung von Steuerncf. the Danish Public Procurement Act section 135 (3)
Terroristische Straftaten oder Straftaten im Zusammenhang mit terroristischen Aktivitätencf. the Danish Public Procurement Act section 135 (1), para 4
5. Los
5.1.
LosLOT-0000
Titeltender for a batch spray tool
BeschreibungDTU Nanolab requires one spray tool equipped with ozone, HF, HCl and NH4OH for wafer cleaning purposes. The tool is to be able to handle batch processing (up to 25 wafers per run). The tool will be used in our ISO 14644-1 Class 4 and 5 clean room. The tool will be used by many different users with diverse backgrounds, which means that operator safety is an important aspect. Another important aspect is the ease of use with special attention on software operation and setup change for different wafer sizes. Please see Appendix 1 Requirement specification for further information.
Interne Kennung9868
5.1.1.
Zweck
Art des AuftragsLieferleistungen
Haupteinstufung (cpv): 38000000 Laborgeräte, optische Geräte und Präzisionsgeräte (außer Gläser)
Optionen
Beschreibung der OptionenOptions under the Agreement can be purchased as add-ons/activated by DTU within one year after Delivery (completed SAT). The agreement includes two separate options, see appendix 1.1.
5.1.2.
Erfüllungsort
Land, Gliederung (NUTS)Københavns omegn (DK012)
LandDänemark
5.1.3.
Geschätzte Dauer
Laufzeit1 Jahr
5.1.5.
Wert
Geschätzter Wert ohne MwSt.1 100 000,00 EUR
5.1.6.
Allgemeine Informationen
Vorbehaltene Teilnahme
Teilnahme ist nicht vorbehalten.
Auftragsvergabeprojekt nicht aus EU-Mitteln finanziert
Die Beschaffung fällt unter das Übereinkommen über das öffentliche Beschaffungswesenja
Zusätzliche InformationenParticipation in the tender procedure may only take place by electronic means via the electronic tendering system used by the contracting entity. For access to the tender documents, the tenderer must be registered or register as a user. If the tender contains several versions of the same document, the latest uploaded version will apply. All communication in connection with the tender procedure, including questions and answers, must take place through the electronic tendering system. Reference is made to the Instruction to Tenderers for information concerning questions and answers. Tenderers are requested to keep updated via the electronic tendering system. If the tenderer encounters problems with the system, please contact support by e-mail, dksupport@eu-supply.com, or telephone (+45) 70 20 80 14. Section 134a of the Danish Public Procurement Act shall apply to this tender procedure. The tenderer must submit an ESPD with the tender as preliminary documentation of the circumstances set out in section 148(1), paras (1)-(3) of the Danish Public Procurement Act. It is not necessary for the tenderer to sign the ESPD document. For groups of operators (e.g., a consortium), a separate ESPD must be submitted for each participating operator. Where the tenderer is a group of operators, the ESPD document of each participant in the group must be signed by the participant in question. The tenderer heading the group and submitting the tender is not required to sign its ESPD document. If the tenderer relies on the capacities of other entities, an ESPD must be submitted for and signed by each of the entities on which the tenderer relies. Before the award decision is made, the tenderer to whom the contracting entity intends to award the contract must provide documentation of the information submitted in the ESPD pursuant to sections 151-152, cf. section 153 of the Danish Public Procurement Act or pursuant to section 156, see the Instruction to tenderers The contracting entity may use the procedure of section 159(5) of the Danish Public Procurement Act in the event that tenders do not comply with the requirements of the tender documents. Attention is drawn to Article 5k in Regulation (EU) No 833/2014 as amended which applies to the tender procedure. Tenderers must sign a declaration regarding Regulation (EU) no 833/2014 as amended.
5.1.9.
Eignungskriterien
Kriterium
ArtWirtschaftliche und finanzielle Leistungsfähigkeit
BezeichnungNet turnover
Beschreibung des EignungskriteriumsFor the last audited financial year, as a minimum the Tenderer must have had a: - Net turnover of EUR 2,000,000 The tenderer shall state the Net Turnover in the ESPD. Upon request from DTU, the tenderer must submit documentation for the Net Turnover. The documentation can be the latest audited financial report, if the Net Turnover is specified. Alternatively, a statement regarding the tenderers Net Turnover in the latest audited financial year. DTU may accept other documentation, cf. The Danish Public Procurement Act section 154(2). If the tenderer cannot comply with the requirement, the Tenderer can rely on the capacities of other entities or participates as a consortium, see Instruction to Tenderers, section 3.2.
Anwendung dieses KriteriumsVerwendet

Kriterium
ArtEignung zur Berufsausübung
Anwendung dieses KriteriumsNicht verwendet

Kriterium
ArtTechnische und berufliche Leistungsfähigkeit
BezeichnungReferences
Beschreibung des EignungskriteriumsAs a minimum the Tenderer must provide 3 references for comparable agreements. Comparable agreements mean agreements concerning delivery, installation and testing of a batch spray tool or a comparable service. The agreement, to which the reference refers, must not be more than 3 years old. The date is calculated from the last signature on the agreement referred to. The tenderer must submit the ESPD with a list of 3 comparable supplies that the tenderer has carried out, cf. above. Each reference is requested to include a brief description of the deliveries made. The description of the delivery should include a clear description of the supplies of the delivery and include information as requested above. The reference is furthermore requested to include the date of signature of the contract, date of final delivery and the name of the customer (recipient). If the Tenderer cannot comply with the requirement, the Tenderer can rely on the capacities of other entities or participate a consortium, see Instruction to Tenderers, section 3.2.
Anwendung dieses KriteriumsVerwendet
5.1.10.
Zuschlagskriterien
Kriterium
ArtPreis
BezeichnungPrice
BeschreibungSee instructions to tenderers
Kategorie des Gewicht-ZuschlagskriteriumsGewichtung (Prozentanteil, genau)
Zuschlagskriterium — Zahl50
Kriterium
ArtQualität
BezeichnungQuality
BeschreibungSee instructions to tenderers
Kategorie des Gewicht-ZuschlagskriteriumsGewichtung (Prozentanteil, genau)
Zuschlagskriterium — Zahl50
5.1.11.
Auftragsunterlagen
Internetadresse der Auftragsunterlagenhttps://eu.eu-supply.com/app/rfq/rwlentrance_s.asp?PID=429164&B=
5.1.12.
Bedingungen für die Auftragsvergabe
Bedingungen für die Einreichung
Elektronische EinreichungErforderlich
Adresse für die Einreichunghttps://eu.eu-supply.com/app/rfq/rwlentrance_s.asp?PID=429164&B=
Sprachen, in denen Angebote oder Teilnahmeanträge eingereicht werden könnenEnglisch
Elektronischer KatalogNicht zulässig
VariantenNicht zulässig
Die Bieter können mehrere Angebote einreichenNicht zulässig
Frist für den Eingang der Angebote02/06/2025 08:00:00 (UTC+00:00) Westeuropäische Zeit, GMT
Dauer, während der das Angebot gültig bleiben muss6 Monate
Informationen über die öffentliche Angebotsöffnung
Eröffnungstermin02/06/2025 08:00:00 (UTC+00:00) Westeuropäische Zeit, GMT
Auftragsbedingungen
Die Auftragsausführung muss im Rahmen von Programmen für geschützte Beschäftigungsverhältnisse erfolgenNein
Bedingungen für die Ausführung des AuftragsThe contract has incorporated the corporate social responsibility considerations, as appropriate, as laid down in the conventions on the basis of which the principles of the UN Global Compact are worded and as laid down in the OECD Guidelines for Multinational Enterprises. The contract furthermore lays down requirements pursuant to ILO Convention no. 94 on labour clauses in public contracts and Circular no. 9471 of 30 June 2014.
Elektronische RechnungsstellungErforderlich
Aufträge werden elektronisch erteiltja
Zahlungen werden elektronisch geleistetnein
5.1.15.
Techniken
Rahmenvereinbarung
Keine Rahmenvereinbarung
Informationen über das dynamische Beschaffungssystem
Kein dynamisches Beschaffungssystem
5.1.16.
Weitere Informationen, Schlichtung und Nachprüfung
ÜberprüfungsstelleKlagenævnet for Udbud
Informationen über die Überprüfungsfristen: Complaint regarding the award of a contract must be submitted no later than 45 calendar days from the date after the Contracting Authority has published a notice in the European Union Official Journal informing that the Contracting Authority has awarded/concluded a contract, cf. lov om Klagenævnet for Udbud (Complaints Board for Tenders) § 7, Section 2, no. 1.
Organisation, die weitere Informationen für die Nachprüfungsverfahren bereitstelltKonkurrence- og Forbrugerstyrelsen
TED eSenderMercell Holding ASA
8. Organisationen
8.1.
ORG-0001
Offizielle BezeichnungDanmarks Tekniske Universitet - DTU
Registrierungsnummer30060946
PostanschriftAnker Engelunds Vej 1
StadtKgs. Lyngby
Postleitzahl2800
Land, Gliederung (NUTS)Københavns omegn (DK012)
LandDänemark
KontaktpersonMia Iversen
E-Mailmihaiv@dtu.dk
Telefon+45 61262786
Internetadressehttps://www.dtu.dk
Profil des Erwerbershttps://eu.eu-supply.com/ctm/company/companyinformation/index/165863
Rollen dieser Organisation
Beschaffer
8.1.
ORG-0002
Offizielle BezeichnungKlagenævnet for Udbud
Registrierungsnummer37795526
PostanschriftNævnenes hus, Toldboden 2
StadtViborg
Postleitzahl8800
Land, Gliederung (NUTS)Østjylland (DK042)
LandDänemark
E-Mailklfu@erst.dk
Telefon+45 35291000
Internetadressehttp://www.klfu.dk
Rollen dieser Organisation
Überprüfungsstelle
8.1.
ORG-0003
Offizielle BezeichnungKonkurrence- og Forbrugerstyrelsen
Registrierungsnummer10294819
PostanschriftCarl Jacobsens Vej 35
StadtValby
Postleitzahl2500
Land, Gliederung (NUTS)Byen København (DK011)
LandDänemark
E-Mailkfst@kfst.dk
Telefon+45 41715000
Internetadressehttp://www.kfst.dk
Rollen dieser Organisation
Organisation, die weitere Informationen für die Nachprüfungsverfahren bereitstellt
8.1.
ORG-0004
Offizielle BezeichnungMercell Holding ASA
Registrierungsnummer980921565
PostanschriftAskekroken 11
StadtOslo
Postleitzahl0277
Land, Gliederung (NUTS)Oslo (NO081)
LandNorwegen
KontaktpersoneSender
E-Mailpublication@mercell.com
Telefon+47 21018800
Fax+47 21018801
Internetadressehttp://mercell.com/
Rollen dieser Organisation
TED eSender
Informationen zur Bekanntmachung
Kennung/Fassung der Bekanntmachungefa4e029-fb1a-4f87-b462-346483740a77  -  01
FormulartypWettbewerb
Art der BekanntmachungAuftrags- oder Konzessionsbekanntmachung – Standardregelung
Unterart der Bekanntmachung16
Datum der Übermittlung der Bekanntmachung30/04/2025 10:12:57 (UTC+00:00) Westeuropäische Zeit, GMT
Bekanntmachung — eSender-Übermittlungsdatum30/04/2025 12:31:04 (UTC+00:00) Westeuropäische Zeit, GMT
Sprachen, in denen diese Bekanntmachung offiziell verfügbar istEnglisch
Veröffentlichungsnummer der Bekanntmachung285354-2025
ABl. S – Nummer der Ausgabe85/2025
Datum der Veröffentlichung02/05/2025