469198-2026 - Competition
Denmark – Repair and maintenance services of machinery – 2027 Major Overhaul of Allen LP Steam Turbine, Gearbox and Generator
OJ S 129/2026 08/07/2026
Contract or concession notice – standard regime
Services
1. Buyer
1.1.
Buyer
Official nameMaabjerg Energy Center – BioHeat&Power A/S
Emailinfo@mec-bhp.dk
Legal type of the buyerPublic undertaking, controlled by a local authority
Activity of the contracting entityProduction, transport or distribution of gas or heat
2. Procedure
2.1.
Procedure
Title2027 Major Overhaul of Allen LP Steam Turbine, Gearbox and Generator
DescriptionMEC is planning for a major overhaul of the Allen steam turbine at the CHP plant in Maabjerg, Holstebro, Denmark. The unit is a 32 MW twin cylinder condensing turbine commissioned in 1992. To ensure reliable, safe, and efficient operation of the unit a major overhaul of the low-pressure turbine, the reduction gear and generator is needed. For a more thorough description of the Works included in this call for tender, please see the Technical Specification, Appendix 1. Included in this call for tender are also several optional deliveries. For a description of the options, please see section 4 in the Technical Specification, Appendix 1. Purchase or realization of the options are predominantly dependent on the actual findings.
Procedure identifier467361e6-6208-4a10-9c4a-2bc2fcbfec89
Internal identifierac8d3a54-5390-4d5b-a93f-b72c2c6ba48d
Type of procedureNegotiated with prior publication of a call for competition / competitive with negotiation
The procedure is acceleratedno
Main features of the procedureThe procurement procedure is conducted as a negotiated procedure in accordance with the Utilities Directive (Directive 2014/25/EU, as implemented by Order No. 1078 of 29 June 2022). The procurement procedure is conducted entirely electronically, and direct, unrestricted, and free access to the entire tender documentation is available via the Ethics tender portal. Notices, corrigenda, as well as questions and answers, will be made available via the above-mentioned tender portal. Submission of tenders shall likewise take place via the tender portal. (https://www.ethics.dk/ethics/eo#/71a17ea8-f8f4-4efa-b931-c13cbb9b5d62/homepage) In accordance with the rules regarding publication, the tender conditions contain common provisions that will apply to all phases of the call for tender (section 1), information regarding the prequalification phase (section 2), the tender and negotiation phase (section 3-9) and information about the declaration and signing of the contract (section 10-11). As a precondition for an applicant to be declared eligible to undertake the contract and therefore prequalified, the applicant must submit a completed and dated ESPD (European Single Procurement Document), which must contain the following: 1) A completed European Single Procurement Document (ESPD) for the applicant, as well as a completed and signed ESPD for any supporting entities/consortium members. 2) Information about the economic and financial standing of the applicant. 2.1 A solvency ratio of a minimum of 20 % in the Last Fiscal Year (i.e 2025) (LFY). 3) Information about the technical and professional ability of the applicant. 3.1) References: Minimum three (3) and a maximum of five (5) references on major overhaul work for geared steam turbines of sizes >15 MW including the generator within the last 5 years. The permissible age for references has been extended from 3 to 5 years, as the contract is not considered to arise with a frequency that ensures sufficient competition unless the permissible age is extended to 5 years. 3.2) Workshop Facilities: The applicant must as part of the application provide a statement as to the technical equipment directly available to the applicant (either own and/or equipment or sub-contractor’s facilities) with respect to workshop facilities with capacities for handling large components (e.g. rotors) such as lathes, milling machines/vertical lathes, crane capacities, balancing facilities etc. 3.3) Engineering competencies and capacities: The applicant must describe and whether field service manpower (TFA’s, mechanics, specialist services etc.) are own staff or subcontracted. The applicant must include a statement about the access to qualified engineering capabilities and capacities in case of fact findings, recommended modifications, repair works, or reverse engineering of spare parts needed during the major overhaul should require such services. Please use the form provided in Appendix A for 3.1, 3.2 and 3.3. From the applicants who fulfill the minimum requirement for economic and financial standing and are not subject to any of the mandatory grounds of exclusions, MEC selects 3 applicants, who will be invited to submit a tender ("Initial Offer"). The selection will be based on the technical and professional ability of the applicant in 3.1, 3.2 and 3.3. MEC reserves the right to award the contract on the basis of the initial offer, without entering into negotiations with the tenderers. Accordingly, Tenderers are urged to submit their best possible offer as early in the process as possible, as they not necessarily be given the opportunity to submit additional revised tenders. MEC expects to conduct the negotiations as a relatively short process. The purpose of the negotiations is to clarify and negotiate the "Initial Offer", so they will be optimized compared to the needs and requirements of MEC. Furthermore, the purpose is to increase the understanding of both parties regarding the character, challenges, and conditions of the work. The contract will be awarded the most economically advantageous tender based on the award criterion "best price-quality ratio" with the following sub-criteria and weighting: 1. Price: Weighted 30% 2. Description of technical solution: Weighted 40 % 3. Time schedule: Weighted 15 % 4. Key persons and organization: Weighted 15 % Requests for participation and tenders are prepared at the expense of the applicants and tenderers, and no compensation will be offered. This also applies to attending the negotiation meetings and site visits.
2.1.1.
Purpose
Main nature of the contractServices
Main classification (cpv): 50530000 Repair and maintenance services of machinery
Additional classification (cpv): 42110000 Turbines and motors, 42112000 Turbine installations, 42112100 Steam turbines, 42112400 Turbine equipment, 42113000 Parts of turbines, 42113100 Parts of steam turbines, 42142000 Parts of gearing and driving elements, 50532300 Repair and maintenance services of generators
2.1.2.
Place of performance
Postal addressEnergivej 2, Måbjerg  
TownHolstebro
Postcode7500
Country subdivision (NUTS)Vestjylland (DK041)
CountryDenmark
2.1.4.
General information
Legal basis
Directive 2014/25/EU
2.1.6.
Grounds for exclusion
Sources of grounds for exclusionEuropean Single Procurement Document (ESPD)Notice
CorruptionHas the economic operator itself or any person who is a member of its administrative, management or supervisory body or has powers of representation, decision or control therein been the subject of a conviction by final judgment for corruption, by a conviction rendered at the most five years ago or in which an exclusion period set out directly in the conviction continues to be applicable? As defined in Article 3 of the Convention on the fight against corruption involving officials of the European Communities or officials of Member States of the European Union, OJ C 195, 25.6.1997, p. 1, and in Article 2(1) of Council Framework Decision 2003/568/JHA of 22 July 2003 on combating corruption in the private sector (OJ L 192, 31.7.2003, p. 54). This exclusion ground also includes corruption as defined in the national law of the contracting authority (contracting entity) or the economic operator. Documentation that the applicant/tenderer is not covered by exclusion can be verified by a service certificate (DK) or by equivalent documentation in accordance with section 152 of the Public Procurement Act. The documentation may not be more than 6 months old at the time the Contracting Authority requests it.
FraudHas the economic operator itself or any person who is a member of its administrative, management or supervisory body or has powers of representation, decision or control therein been the subject of a conviction by final judgment for fraud, by a conviction rendered at the most five years ago or in which an exclusion period set out directly in the conviction continues to be applicable? Within the meaning of Article 1 of the Convention on the protection of the European Communities' financial interests (OJ C 316, 27.11.1995, p. 48). Documentation that the applicant/tenderer is not covered by exclusion can be verified by a service certificate (DK) or by equivalent documentation in accordance with section 152 of the Public Procurement Act. The documentation may not be more than 6 months old at the time the Contracting Authority requests it.
Money laundering or terrorist financingHas the economic operator itself or any person who is a member of its administrative, management or supervisory body or has powers of representation, decision or control therein been the subject of a conviction by final judgment for money laundering or terrorist financing, by a conviction rendered at the most five years ago or in which an exclusion period set out directly in the conviction continues to be applicable? As defined in Article 1 of Directive 2005/60/EC of the European Parliament and of the Council of 26 October 2005 on the prevention of the use of the financial system for the purpose of money laundering and terrorist financing (OJ L 309, 25.11.2005, p. 15). Documentation that the applicant/tenderer is not covered by exclusion, can be verified by a service certificate (DK) or by corresponding documentation in accordance with section 152 of the Public Procurement Act. The documentation may not be more than 6 months old at the time when the Contracting Authority requests it.
Participation in a criminal organisationHas the economic operator itself or any person who is a member of its administrative, management or supervisory body or has powers of representation, decision or control therein been the subject of a conviction by final judgment for participation in a criminal organisation, by a conviction rendered at the most five years ago or in which an exclusion period set out directly in the conviction continues to be applicable? As defined in Article 2 of Council Framework Decision 2008/841/JHA of 24 October 2008 on the fight against organised crime (OJ L 300, 11.11.2008, p. 42). Documentation that the applicant/tenderer is not covered by exclusion can be verified by a service certificate (DK) or by equivalent documentation in accordance with section 152 of the Danish Public Procurement Act. The documentation may not be more than 6 months old at the time when the Contracting Authority requests it.
Terrorist offences or offences linked to terrorist activitiesHas the economic operator itself or any person who is a member of its administrative, management or supervisory body or has powers of representation, decision or control therein been the subject of a conviction by final judgment for terrorist offences or offences linked to terrorist activities, by a conviction rendered at the most five years ago or in which an exclusion period set out directly in the conviction continues to be applicable? As defined in Articles 1 and 3 of Council Framework Decision of 13 June 2002 on combating terrorism (OJ L 164, 22.6.2002, p. 3). This exclusion ground also includes inciting or aiding or abetting or attempting to commit an offence, as referred to in Article 4 of that Framework Decision. Documentation that the applicant/tenderer is not covered by exclusion can be verified by a service certificate (DK) or by equivalent documentation in accordance with section 152 of the Public Procurement Act. The documentation may not be more than 6 months old at the time the Contracting Authority requests it.
Child labour and including other forms of trafficking in human beingsHas the economic operator itself or any person who is a member of its administrative, management or supervisory body or has powers of representation, decision or control therein been the subject of a conviction by final judgment for child labour and other forms of trafficking in human beings, by a conviction rendered at the most five years ago or in which an exclusion period set out directly in the conviction continues to be applicable? As defined in Article 2 of Directive 2011/36/EU of the European Parliament and of the Council of 5 April 2011 on preventing and combating trafficking in human beings and protecting its victims, and replacing Council Framework Decision 2002/629/JHA (OJ L 101, 15.4.2011, p. 1). Documentation that the applicant/tenderer is not covered by exclusion can be verified by a service certificate (DK) or by equivalent documentation in accordance with section 152 of the Danish Public Procurement Act. The documentation may not be more than 6 months old at the time when the Contracting Authority requests it.
Misrepresentation, withheld information, unable to provide required documents or obtained confidential information of this procedureCan the economic operator confirm that: a) It has been guilty of serious misrepresentation in supplying the information required for the verification of the absence of grounds for exclusion or the fulfilment of the selection criteria, b) It has withheld such information, c) It has not been able, without delay, to submit the supporting documents required by a contracting authority or contracting entity, and d) It has undertaken to unduly influence the decision making process of the contracting authority or contracting entity, to obtain confidential information that may confer upon it undue advantages in the procurement procedure or to negligently provide misleading information that may have a material influence on decisions concerning exclusion, selection or award? Cf. Pursuant to Sections 136(1)(3) and 137(1)(5), an applicant/tenderer will be excluded from participation in a procurement procedure when the contracting Authority can prove that the applicant/tenderer has provided incorrect information, retained information or is unable to submit additional documents in relation to the grounds for exclusion stated in section 135(1) or (3) of the Public Procurement Act and, if relevant, in section 137(1)(2) or (7) of the Public Procurement Act, the fixed minimum requirements laid down in sections 140-144 of the Public Procurement Act or the selection in section 145 of the Public Procurement Act.
Conflict of interest due to its participation in the procurement procedureIs the economic operator aware of any conflict of interest, as indicated in national law, the relevant notice or the procurement documents due to its participation in the procurement procedure? Cf. Pursuant to section 136(1)(1) of the Danish Public Procurement Act, the applicant/tenderer will be excluded from participation in the procurement procedure when the Contracting Authority can prove a conflict of interest, cf. Section 24(18) of the Public Procurement Act in relation to the tender in question and when it cannot be effectively removed by less radical means.
Direct or indirect involvement in the preparation of this procurement procedureHas the economic operator or an undertaking related to it advised the contracting authority or contracting entity or otherwise been involved in the preparation of the procurement procedure? Cf. Pursuant to section 136(1)(2) of the Danish Public Procurement Act, the applicant/tenderer will be excluded from participation in the procurement procedure when the Contracting Authority can prove a distortion of competition, cf. section 39 of the Danish Public Procurement Act, in relation to the procurement procedure in question that cannot be effectively removed by less radical means.
Breaching obligation relating to payment of social security contributionsHas the economic operator breached its obligations relating to the payment social security contributions, both in the country in which it is established and in Member State of the contracting authority or contracting entity if other than the country of establishment? Documentation that the applicant/tenderer is not covered by exclusion can be verified by a service certificate (DK) or by equivalent documentation in accordance with section 152 of the Public Procurement Act. The documentation may not be more than 6 months old at the time the Contracting Authority requests it.
Breaching obligation relating to payment of taxesHas the economic operator breached its obligations relating to the payment of taxes, both in the country in which it is established and in Member State of the contracting authority or contracting entity if other than the country of establishment? Documentation that the applicant/tenderer is not covered by exclusion can be verified by a service certificate (DK) or by equivalent documentation in accordance with section 152 of the Public Procurement Act. The documentation may not be more than 6 months old at the time the Contracting Authority requests it.
5. Lot
5.1.
LotLOT-0000
Title2027 Major Overhaul of Allen LP Steam Turbine, Gearbox and Generator
DescriptionMEC is planning for a major overhaul of the Allen steam turbine at the CHP plant in Maabjerg, Holstebro, Denmark. The unit is a 32 MW twin cylinder condensing turbine commissioned in 1992. To ensure reliable, safe, and efficient operation of the unit a major overhaul of the low-pressure turbine, the reduction gear and generator is needed. For a more thorough description of the Works included in this call for tender, please see the Technical Specification, Appendix 1. Included in this call for tender are also several optional deliveries. For a description of the options, please see section 4 in the Technical Specification, Appendix 1. Purchase or realization of the options are predominantly dependent on the actual findings.
Internal identifier7fbdecfc-42bc-4f5f-a3a8-6453f5404e81
5.1.1.
Purpose
Main nature of the contractServices
Main classification (cpv): 50530000 Repair and maintenance services of machinery
Additional classification (cpv): 42110000 Turbines and motors, 42112000 Turbine installations, 42112100 Steam turbines, 42112400 Turbine equipment, 42113000 Parts of turbines, 42113100 Parts of steam turbines, 42142000 Parts of gearing and driving elements, 50532300 Repair and maintenance services of generators
Options
Description of the optionsOptions are described in Appendix 1, Technical Specification, section 4. It contains: 4.1 Machining of turbine shaft 4.2 New sealing elements/steam baffles for diaphragms 4.3 New blades and replacement 4.4 High-speed balancing of turbine rotor 4.5 Turbine, generator and gear box bearings 4.6 Recommended spare parts or services
5.1.2.
Place of performance
Postal addressEnergivej 2, Måbjerg  
TownHolstebro
Postcode7500
Country subdivision (NUTS)Vestjylland (DK041)
CountryDenmark
5.1.3.
Estimated duration
Duration2 027 Years
5.1.4.
Renewal
Maximum renewals0
5.1.6.
General information
Reserved participation
Participation is not reserved.
The names and professional qualifications of the staff assigned to perform the contract must be givenTender requirement
Procurement Project not financed with EU Funds.
The procurement is covered by the Government Procurement Agreement (GPA)yes
5.1.9.
Selection criteria
Sources of selection criteriaEuropean Single Procurement Document (ESPD)Procurement DocumentNotice
CriterionFinancial ratio
Description of selection criterionThe applicant must inform the following regarding economic and financial standing: Solvency ratio, which is defined as: Equity/Total Assets * 100, in the Last Fiscal Year (LFY). MEC has the following minimum requirements regarding the economic and financial standing of the applicant: A solvency ratio of a minimum of 20 % in the Last Fiscal Year (i.e 2025) (LFY). MEC requires that the tenderer provide documentation of its economic and financial standing.

CriterionReferences on specified services
Description of selection criterionMinimum three (3) and a maximum of five (5) references on major overhaul work for geared steam turbines of sizes >15 MW including the generator within the last 5 years. List of relevant references, describing the applicant's experience with major overhaul work of (preferably multi-cylinder) geared steam turbines including generators within the last 5 years. The references must include the project managing role (overall responsibility during planning and project execution), technical field advisory, site management and supply of all needed manpower and spare parts. The description of the references must include a short description of the works including: › Make, type and size of steam turbine › Make and type of gearbox › Make and type of generator › The applicant's roles and scope of work › Start and end date of the work › Name of the client/customer, incl. contact details Please use the form provided in Appendix A. The selection will be based on MEC's assessment of which of the applicants have: The most relevant, understood by MEC as references that have the better similarity to scope, turbine, gear and generator, and recent references.
The criteria will be used to select the candidates to be invited for the second stage of the procedure
Maximum number of tenders passing3

CriterionTechnicians or technical bodies for quality control
Description of selection criterionTechnical facilities and measures for ensuring quality Workshop Facilities: The applicant must as part of the application provide a statement as to the technical equipment directly available to the applicant (either own and/or equipment or sub-contractor’s facilities) with respect to workshop facilities with capacities for handling large components (e.g. rotors) such as lathes, milling machines/vertical lathes, crane capacities, balancing facilities etc. Please use the form provided in Appendix A. The selection will be based on MEC's assessment of which of the applicants have: Proximity and ease of access to workshop facilities and field service manpower (own or subcontractors), based on the applicants statement regarding the technical equipment directly available to the applicant (either own equipment or supporting entities’ equipment) with respect to workshop facilities, including equipment such as lathes and, milling/drilling machines for large workpieces, relevant test/measuring equipment, lifting equipment, access to facilities for high-speed balancing of rotors etc. Proximity and ease of access to workshop facilities and field service manpower (own or subcontractors).
The criteria will be used to select the candidates to be invited for the second stage of the procedure
Maximum number of tenders passing3

CriterionRelevant educational and professional qualifications
Description of selection criterionEngineering competencies and capacities: The applicant must describe and whether field service manpower (TFA’s, mechanics, specialist services etc.) are own staff or subcontracted. The applicant must include a statement about the access to qualified engineering capabilities and capacities in case of fact findings, recommended modifications, repair works, or reverse engineering of spare parts needed during the major overhaul should require such services. Please use the form provided in Appendix A. The selection will be based on MEC's assessment of which of the applicants have: Provided a satisfactory specification of and access to the technical competences and capacities relevant for the scope, as regards technical bodies within field service manpower (e.g. site manager(s), turbine/generator/gear box supervisor(s), commissioning engineer(s), balancing specialist, mechanical fitters, NDT specialist(s), certified crane driver(s), assistance for cleaning, etc.), as well as technical bodies within qualified engineering (e.g. fact findings, recommended modifications and reverse engineering of spare parts).
The criteria will be used to select the candidates to be invited for the second stage of the procedure
Maximum number of tenders passing3
Information about the second stage of a two-stage procedure
Maximum number of candidates to be invited for the second stage of the procedure3
The procedure will take place in successive stages. At each stage, some participants may be eliminated
5.1.10.
Award criteria
Criterion
TypePrice
NamePrice
DescriptionThe evaluation of the sub-criterion "Price" (Tender Conditions, section 9.1.1) will be based on a total of the following: 1. The total Basic Scope of Supply according to the Price List 2. The total of the Options according to the Price List. The total of the Options will be a Corrected sum calculated according to the weightings. 3. Mandatory spare parts 4. Rates for extra works/Variations
Category of award weight criterionWeight (percentage, exact)
Award criterion number30
Criterion
TypeQuality
NameDescription of technical solution
DescriptionDescription of technical solution is evaluated solely on the specific requirements and guidelines described in the procurement material (Tender Conditions, section 9.1.2).
Category of award weight criterionWeight (percentage, exact)
Award criterion number40
Criterion
TypeQuality
NameTime schedule
Description"Time schedule" is evaluated solely on the specific requirements and guidelines described in the procurement material (Tender Conditions, section 9.1.3).
Category of award weight criterionWeight (percentage, exact)
Award criterion number15
Criterion
TypeQuality
NameKey persons and organization
DescriptionIt is important for the Contracting Authority that the bidder, in their bid, presents an organization that ensures the project is delivered with high quality. Therefore, the Contracting Authority will place emphasis on the bid containing a robust organization and key personnel with the right professional competencies (Tender Conditions, section 9.1.4).
Category of award weight criterionWeight (percentage, exact)
Award criterion number15
5.1.11.
Procurement documents
Address of the procurement documentshttps://www.ethics.dk/ethics/eo#/71a17ea8-f8f4-4efa-b931-c13cbb9b5d62/homepage
5.1.12.
Terms of procurement
Terms of submission
Electronic submissionRequired
Address for submissionhttps://www.ethics.dk/ethics/eo#/71a17ea8-f8f4-4efa-b931-c13cbb9b5d62/homepage
Languages in which tenders or requests to participate may be submittedEnglish
Electronic catalogueNot allowed
VariantsNot allowed
Tenderers may submit more than one tenderNot allowed
Deadline for receipt of requests to participate12/08/2026 13:00:00 (UTC+00:00) Western European Time, GMT
Terms of contract
The execution of the contract must be performed within the framework of sheltered employment programmesNo
Conditions relating to the performance of the contractPlease, see the Contract Form (draft) for further information. It contains among other elements: The Contractor must ensure the issuing by a bank or credit insurance company approved by MEC, of a performance bond, and possibly an advance payment bond, payable on demand in favor of MEC for 10 % of the contract sum as security for Contractor's performance of its obligations under the Contract, including any Payments and damages to be paid to MEC. If the Contractor fails to deliver the Scope of Supply in accordance with Sub Clause 4.2 agreed Milestones, MEC is entitled to delay damages. Liquated damages due to delay shall be calculated on the basis of the Payments. If any of the milestones are not made within the milestones laid down in the time schedule, the Contractor shall be liable to pay delay damages (daily penalties) of 0,5 % of the Payments for each commenced day of delay. The total payment of delay damages cannot exceed 10 % of the total Payments for the Scope of Supply.
A non-disclosure agreement is requiredyes
Electronic invoicingAllowed
Electronic ordering will be usedno
Electronic payment will be usedyes
Financial arrangementThe Payments will be paid according to this payment plan: › 15 % of the contract sum at mobilization on the Site and upon delivery of the Advance Payment Bond (Appendix 5). › 60 % of the contract sum at mechanical completion › 15 % of the contract sum at Hand-over › 10 % of the contract sum at delivery of final documentation approved by MEC. Please, see the Contract Form (draft) for further information.
5.1.15.
Techniques
Framework agreement
No framework agreement
Information about the dynamic purchasing system
No dynamic purchase system
5.1.16.
Further information, mediation and review
Review organisationKlagenævnet for Udbud (Danish Complaints Board for Public Procurement)
Organisation providing additional information about the procurement procedureMaabjerg Energy Center – BioHeat&Power A/S
Organisation providing more information on the review proceduresKonkurrence- og Forbrugerstyrelsen (Danish Competition and Consumer Authority)
8. Organisations
8.1.
ORG-0001
Official nameMaabjerg Energy Center – BioHeat&Power A/S
Registration number25 49 59 77
Postal addressNupark 51, Måbjerg
TownHolstebro
Postcode7500
Country subdivision (NUTS)Vestjylland (DK041)
CountryDenmark
Contact pointMaabjerg Energy Center – BioHeat&Power A/S
Emailinfo@mec-bhp.dk
Telephone+4596127300
Fax96127301
Internet addresshttps://www.maabjergenergycenter.dk/
Roles of this organisation
Buyer
Organisation providing additional information about the procurement procedure
8.1.
ORG-0002
Official nameKlagenævnet for Udbud (Danish Complaints Board for Public Procurement)
Registration number37795526
Postal addressToldboden 2
TownViborg
Postcode8800
Country subdivision (NUTS)Vestjylland (DK041)
CountryDenmark
Contact pointKlagenævnet for Udbud
Emailklfu@naevneneshus.dk
Telephone+45 72405600
Internet addresshttps://naevneneshus.dk/start-din-klage/klagenaevnet-for-udbud/
Roles of this organisation
Review organisation
8.1.
ORG-0003
Official nameKonkurrence- og Forbrugerstyrelsen (Danish Competition and Consumer Authority)
Registration number10294819
Postal addressCarl Jacobsens Vej 35
TownValby
Postcode2500
Country subdivision (NUTS)Byen København (DK011)
CountryDenmark
Contact pointKonkurrence- og Forbrugerstyrelsen
Emailkfst@kfst.dk
Telephone+45 41715000
Internet addresshttps://www.kfst.dk
Roles of this organisation
Organisation providing more information on the review procedures
8.1.
ORG-0004
Official nameMercell Holding ASA
Registration number980921565
Postal addressAskekroken 11
TownOslo
Postcode0277
Country subdivision (NUTS)Oslo (NO081)
CountryNorway
Contact pointeSender
Emailpublication@mercell.com
Telephone+47 21018800
Fax+47 21018801
Internet addresshttp://mercell.com/
Roles of this organisation
TED eSender
Notice information
Notice identifier/versiond8e5a776-fc61-430b-b701-6579d72bfc83  -  01
Form typeCompetition
Notice typeContract or concession notice – standard regime
Notice subtype17
Notice dispatch date07/07/2026 05:47:22 (UTC+00:00) Western European Time, GMT
Notice dispatch date (eSender)07/07/2026 06:31:48 (UTC+00:00) Western European Time, GMT
Languages in which this notice is officially availableEnglish
Notice publication number469198-2026
OJ S issue number129/2026
Publication date08/07/2026