17ORG-000050Hertz Offshore GmbH50Hertz Offshore GmbHHeidestraße 2Berlin10557DE300DEUHRB 108780 B+491756921160andre.forbrig@50hertz.comORG-0001Vergabekammer des Landes BerlinVergabekammer des Landes BerlinMartin-Luther-Str. 105Berlin10825DE300DEUDE296830277vergabekammer@senwtf.berlin.deORG-0002Datenservice Öffentlicher Einkauf (in Verantwortung des Beschaffungsamts des BMI)Datenservice Öffentlicher Einkauf (in Verantwortung des Beschaffungsamts des BMI)Bonn53119DEA22DEU0204:994-DOEVD-83+49228996100noreply.esender_hub@bescha.bund.de00675843-2026190/20262026-10-01+02:002.3eforms-sdk-1.14eforms-sdk-1.14ff52fc1b-1d87-420e-9ddb-45218ccc77be3a14c7e0-db43-45a3-8d7c-d5e358d8e7e32026-09-25+02:0011:53:40.169691835+02:00012026-10-01+02:0032014L0025cn-standardDEUENGelectricityORG-0000ted-esenORG-0002sektvoexg-crim-partThe reasons for exclusion mentioned here are not an exhaustive list of the reasons for exclusion. The final reasons for exclusion can be found in the procurement documents.The reasons for exclusion mentioned here are not an exhaustive list of the reasons for exclusion. The final reasons for exclusion can be found in the procurement documents.epo-noticeneg-w-callfalsePlanting of Seagrass for Ostwind 3 Offshore project between KP18.1-18.4Planting of Seagrass for Ostwind 3 Offshore project between KP18.1-18.4The main target for this operation is the planting of seagrass, either as a single plant or/and as a rope consisting plants. Employer is requesting the Bidder to submit a quotation for the execution of seagrass planting works. The designated location for the seagrass planting is at Ostwind 3 cable route between KP18.1 – 18.4, which is a 325m long and 7m wide (about 2300m²) corridor. Seagrass planting will require the following pre-requisites and follow-ups: A consolidated coarse sediment layer of approx. 20 - 30 cm thickness (engineered material), An execution plan, prepared early enough to achieve the permit in time A permit by authorities (STALU VP, WSA Ostsee), Sufficient plant material seagrass shoots (subject to availability, see details below) to be suitable for planting a harbor nearby (either Thiessow (8km), Freest (11km) or Lubmin (15km)) shall be used for hand-over of seagrass shoots/geotextile ropes with seagrass from Third Party supplier In case it is required the work area per operational day shall be first marked by rods/subsurface buoys attached to small ground weights prior to planting to allow for correct planting spatially and regarding shoot density/m². In case of non-fins-diving solutions it can be done different. shifting of work site day by day shall be enabled by installation of a remote-controlled sub-surface marker buoy with release system on last position of executed work, respectively work executed on previous days shall be inspected by means of underwater video (ROV or UW-drone) repeatedly General assumptions about the task: Total impact area to be restored will be ~2.300m² Work can be executed by divers in accordance with the requirements of DGUV Regel 101-023. Alternatively work can be executed by ROV, if the Contractor can proof the suitability of the technology by references Seagrass planting shall start (latest) on 1st of June 2027 and has to be completed by 31st of July 2027. Employer considers two alternative planting methods: (1) planting of single shoots (2) Installation of rotable fabric ropes with incorporated shoots Suitable ropes ready for installation will be provided by an assigned manufacturer. Single shoot planting planting is the preferred procedure, but rope installation shall be implemented in parallel too. If you are interested in participating in the described procedure, please contact us by e-mail (andre.forbrig@50hertz.com) and express your interest in participating. With the expression of interest, we need the following information from you in order to be able to add you to the project in Ariba: - Full name of the company: - Address of the company: - V.A.T. Number: - Tax Number: - Commercial register number: In addition, I need the contact details of the people who you should have access to the Ariba system: - Name - E-mail address - Phone numberThe main target for this operation is the planting of seagrass, either as a single plant or/and as a rope consisting plants. Employer is requesting the Bidder to submit a quotation for the execution of seagrass planting works. The designated location for the seagrass planting is at Ostwind 3 cable route between KP18.1 – 18.4, which is a 325m long and 7m wide (about 2300m²) corridor. Seagrass planting will require the following pre-requisites and follow-ups: A consolidated coarse sediment layer of approx. 20 - 30 cm thickness (engineered material), An execution plan, prepared early enough to achieve the permit in time A permit by authorities (STALU VP, WSA Ostsee), Sufficient plant material seagrass shoots (subject to availability, see details below) to be suitable for planting a harbor nearby (either Thiessow (8km), Freest (11km) or Lubmin (15km)) shall be used for hand-over of seagrass shoots/geotextile ropes with seagrass from Third Party supplier In case it is required the work area per operational day shall be first marked by rods/subsurface buoys attached to small ground weights prior to planting to allow for correct planting spatially and regarding shoot density/m². In case of non-fins-diving solutions it can be done different. shifting of work site day by day shall be enabled by installation of a remote-controlled sub-surface marker buoy with release system on last position of executed work, respectively work executed on previous days shall be inspected by means of underwater video (ROV or UW-drone) repeatedly General assumptions about the task: Total impact area to be restored will be ~2.300m² Work can be executed by divers in accordance with the requirements of DGUV Regel 101-023. Alternatively work can be executed by ROV, if the Contractor can proof the suitability of the technology by references Seagrass planting shall start (latest) on 1st of June 2027 and has to be completed by 31st of July 2027. Employer considers two alternative planting methods: (1) planting of single shoots (2) Installation of rotable fabric ropes with incorporated shoots Suitable ropes ready for installation will be provided by an assigned manufacturer. Single shoot planting planting is the preferred procedure, but rope installation shall be implemented in parallel too. If you are interested in participating in the described procedure, please contact us by e-mail (andre.forbrig@50hertz.com) and express your interest in participating. With the expression of interest, we need the following information from you in order to be able to add you to the project in Ariba: - Full name of the company: - Address of the company: - V.A.T. Number: - Tax Number: - Commercial register number: In addition, I need the contact details of the people who you should have access to the Ariba system: - Name - E-mail address - Phone numberservicesIn compliance with the principles of transparency and equal treatment, the Client may request applicants to submit missing company-related documents, in particular self-declarations, information, certificates or other evidence. Applicants are not entitled to a subsequent request for documents.In compliance with the principles of transparency and equal treatment, the Client may request applicants to submit missing company-related documents, in particular self-declarations, information, certificates or other evidence. Applicants are not entitled to a subsequent request for documents.80000077310000Boddenzone KP18.1 - KP18.4. (Greifswald)Boddenzone KP18.1 - KP18.4. (Greifswald)DE80NDEULOT-0000slc-suit-reg-tradeÜbermittlung eines Auszugs aus dem HandelsregisterSubmission of an extract from the commercial registerslc-stand-otherHiermit erklären wir, dass auf unser Unternehmen und im Falle der Eignungsleihe bei dem leihenden Unternehmen keine Ausschlussgründe gemäß §§ 123, 124 GWB bestehen.We hereby declare that there are no grounds for exclusion pursuant to Sections 123 and 124 GWB on our company and in the case of a suitable loan from the borrowing company.slc-abil-ref-workAuslieferung des ordnungsgemäß ausgefüllten Formulars "Technical and Professional Capability (References)". Der Bieter ist nicht verpflichtet, alle Qualifikationsanforderungen innerhalb eines einzelnen Referenzprojekts nachzuweisen. Die erforderliche Erfahrung kann durch ein oder mehrere Referenzprojekte nachgewiesen werden, vorausgesetzt, der Gesamtsatz der Referenzen zeigt die Fähigkeit des Bieters, die Arbeiten durchzuführen. Marineoperationen Nachweis der folgenden Erfahrung durch ein oder mehrere Referenzprojekte, die in den letzten fünf (5) Jahren abgeschlossen wurden und eine oder mehrere der folgenden Dienstleistungen umfassen: Marinearbeiten in Küsten- und/oder Offshore-Gewässern Tauch-, ROV- und/oder Vermessungsoperationen Installationsarbeiten am Meeresboden Durchführung von Arbeiten in umweltbewussten Meeresumgebungen Tauchdienste Nachweis der folgenden Erfahrung durch ein oder mehrere Referenzprojekte, die in den letzten fünf (5) Jahren abgeschlossen wurden und eine oder mehrere der folgenden Dienstleistungen umfassen: Kommerzielle Taucharbeiten in Meeresumgebungen Tauchoperationen, die gemäß anerkannten Tauchstandards (z. B. DGUV oder gleichwertig) durchgeführt werden Tauchmanagement und Aufsicht Schiffsbetrieb Nachweis der folgenden Erfahrung durch ein oder mehrere Referenzprojekte, die in den letzten fünf (5) Jahren abgeschlossen wurden und eine oder mehrere der folgenden Dienstleistungen umfassen: Bereitstellung und Betrieb geeigneter Arbeitsschiffe Durchführung von Arbeiten in flachen Küstengewässern Mobilisierung und Positionierung von Schiffen und Ausrüstung während maritimer Operationen Umwelt- und ökologische Maßnahmen Nachweis von Erfahrung in Umwelt-, ökologischen und/oder Lebensraumwiederherstellungsprojekten durch ein oder mehrere Referenzprojekte, die in den letzten fünf (5) Jahren abgeschlossen wurden. Relevante Projekte können unter anderem Folgendes umfassen: Wiederherstellung oder Umpflanzung von Seegras Lebensraumwiederherstellungsmaßnahmen Muschelriff oder Riffrestaurierung Natura-2000-Entschädigungsmaßnahmen Wissenschaftliche, Pilot- oder Demonstrationsprojekte im Bereich der Meeresökologie Das Fehlen direkter Erfahrung in der Renaturierung von Seegras disqualifiziert einen Bieter nicht automatisch, vorausgesetzt, der Bieter zeigt relevante marine operative Fähigkeiten und verfügt über ausreichend qualifiziertes Personal sowie Methoden zur Durchführung der Arbeiten. Qualifiziertes Personal Demonstration der folgenden Erfahrungen durch die vorgeschlagenen Schlüsselpersonen, die in den letzten fünf (5) Jahren an vergleichbaren Projekten teilgenommen haben: Projektleiter (Meeresoperationen und/oder Meeresökologie) Meeresökologe und/oder Meeresbiologe Manager für Tauchbetrieb ROV-Spezialist und/oder Schiffskapitän Die Erfahrung des vorgeschlagenen Schlüsselpersonals kann zusätzlich zu den Unternehmensreferenzprojekten berücksichtigt werden. Die von Schlüsselpersonen während ihrer Anstellung bei früheren Arbeitgebern oder Organisationen gesammelten Erfahrungen können anerkannt werden, sofern ihre Beteiligung am jeweiligen Referenzprojekt ausreichend dokumentiert wird.ubmission of the duly completed form “Technical and Professional Capability (References)”. The Bidder is not required to demonstrate all qualification requirements within a single reference project. The required experience may be demonstrated through one or several reference projects, provided that the overall set of references demonstrates the Bidder’s capability to perform the Works. Marine Operations Demonstration of the following experience by means of one or more reference projects completed within the last five (5) years and comprising one or more of the following services: Marine works in coastal and/or offshore waters Diving, ROV and/or survey operations Installation works on the seabed Execution of works in environmentally sensitive marine environments Diving Services Demonstration of the following experience by means of one or more reference projects completed within the last five (5) years and comprising one or more of the following services: Commercial diving works in marine environments Diving operations performed in accordance with recognised diving standards (e.g. DGUV or equivalent) Dive management and supervision Vessel Operations Demonstration of the following experience by means of one or more reference projects completed within the last five (5) years and comprising one or more of the following services: Provision and operation of suitable work vessels Execution of works in shallow coastal waters Mobilisation and positioning of vessels and equipment during marine operations Environmental and Ecological Measures Demonstration of experience in environmental, ecological and/or habitat restoration projects by means of one or more reference projects completed within the last five (5) years. Relevant projects may include, but are not limited to: Seagrass restoration or transplantation Habitat restoration measures Shell reef or reef restoration Natura 2000 compensation measures Scientific, pilot or demonstration projects related to marine ecology The absence of direct seagrass restoration experience shall not automatically disqualify a Bidder, provided that the Bidder demonstrates relevant marine operational capabilities and provides suitably qualified personnel and methodology for execution of the Works. Qualified Personnel Demonstration of the following experience through the proposed key personnel who have participated in comparable projects within the last five (5) years: Project Manager (Marine Operations and/or Marine Ecology) Marine Ecologist and/or Marine Biologist Diving Operations Manager ROV Specialist and/or Vessel Master Experience of the proposed key personnel may be considered in addition to company reference projects. Experience obtained by key personnel while employed by previous employers or organisations may be recognised, provided that their involvement in the respective reference project is adequately documented.slc-sche-qu-cert-indepNachweis über den Besitz einer gültigen ISO 9001:2015-Zertifizierung oder gleichwertigProof of possession of a valid ISO 9001:2015 certification or equivalentslc-abil-staff-qualDas für die Auftragsausführung relevante Personal, das in mündlichen oder schriftlichen Kontakt zum Auftraggeber tritt, beherrscht die deutsche Sprache mindestens auf der Niveaustufe C1 des Gemeinsamen Europäischen Referenzrahmens für Sprache.The personnel relevant to the execution of the contract who make oral or written contact with the client have a command of the German language at least at level C1 of the Common European Framework of Reference for Languages.slc-stand-to-specEs ist eine Erklärung über den Gesamtumsatz sowie den Umsatz in dem Tätigkeitsbereich des hier zu vergebenden Auftrags für die Jahre 2023, 2024 und 2025 abzugebenA declaration of total turnover and turnover in the field of activity of the contract to be awarded here for the years 2023, 2024 and 2025 must be submittedslc-sche-qu-cert-indepNachweis über den Besitz einer gültigen ISO 45001:2018-Zertifizierung oder gleichwertig (wie SCC)Proof of possession of a valid ISO 45001:2018 certification or equivalent (such as SCC)slc-sche-env-cert-indepNachweis über den Besitz einer gültigen ISO 14001:2015-Zertifizierung oder gleichwertigProof of possession of a valid ISO 14001:2015 certification or equivalentfalsenot-allowednot-requnot-allowedfalseunused-idunused-idunused-idENG-1non-restricted-documenthttps://eliagroup.sharepoint.com/:f:/s/EFSS/EFSS/IgAt3bXEzMXASI9Efjks2a1iAfM3v7ngk5soTrbyrcxF2PI?e=oijszZSiehe VergabeunterlageSee award documentsfalseepo-noticenonelate-noneperformanceDetails siehe VertragFor details, see contractnot-allowedfalsenoDie Zuschlagskriterien setzen sich wie folgt zusammen: 50% - "Wertungspreis" 10% - "Vertrag" 40% - "Konzepte" Weitere Details können der Anlage "ACO-ENV-SGP-Zuschlagskriterien" entnommen werden.The award criteria are made up as follows: 50% - "Valuation Prize" 10% - "Contract" 40% - "Concepts" Further details can be found in the appendix "ACO-ENV-SGP Award Criteria".ORG-0000https://www.ariba.comFristen zur Einlegung eines Nachprüfungsantrags ergeben sich aus § 160 Abs. 3 GWB. Zur Klarstellung wird diese Regelung komplett wiedergegeben. "Der Antrag ist unzulässig, soweit 1. der Antragsteller den geltend gemachten Verstoß gegen Vergabevorschriften vor Einreichen des Nachprüfungsantrags erkannt und gegenüber dem Auftraggeber nicht innerhalb einer Frist von zehn Kalendertagen gerügt hat; der Ablauf der Frist nach § 134 Absatz 2 GWB bleibt unberührt, 2. Verstöße gegen Vergabevorschriften, die aufgrund der Bekanntmachung erkennbar sind, nicht spätestens bis zum Ablauf der in der Bekanntmachung benannten Frist zur Bewerbung oder zur Angebotsabgabe gegenüber dem Auftraggeber gerügt werden, 3. Verstöße gegen Vergabevorschriften, die erst in den Vergabeunterlagen erkennbar sind, nicht spätestens bis zum Ablauf der Frist zur Bewerbung oder zur Angebotsabgabe gegenüber dem Auftraggeber gerügt werden, 4. mehr als 15 Kalendertage nach Eingang der Mitteilung des Auftraggebers, einer Rüge nicht abhelfen zu wollen, vergangen sind.Deadlines for filing an application for review result from Section 160 (3) GWB. For the sake of clarification, this provision is reproduced in full. "The application is inadmissible to the extent that 1. the applicant has recognised the alleged infringement of procurement regulations before the application for review is filed and has not complained to the contracting authority within a period of ten calendar days; the expiry of the period under Section 134 (2) GWB remains unaffected, 2. Violations of procurement regulations that are recognisable on the basis of the contract notice are not reported to the contracting authority by the expiry of the deadline for application or submission of tenders specified in the contract notice at the latest, 3. Violations of procurement regulations that are only recognisable in the procurement documents are not complained of to the contracting authority by the expiry of the deadline for applying or submitting a tender at the latest, 4. more than 15 calendar days have elapsed after receipt of the contracting authority's notification that it does not wish to remedy a complaint.ORG-0000ORG-0001ENGVergabeplattform ARIBArequiredtruehttp://www.ariba.com2026-11-02+01:002026-10-26+01:0018:00:00+01:002026-10-16+02:0012:00:00+02:00falsebuyer-categoriesnonenoneLos 1Planting of Seagrass for Ostwind 3 Offshore project between KP18.1-18.4Planting of Seagrass for Ostwind 3 Offshore project between KP18.1-18.4The main target for this operation is the planting of seagrass, either as a single plant or/and as a rope consisting plants. Employer is requesting the Bidder to submit a quotation for the execution of seagrass planting works. The designated location for the seagrass planting is at Ostwind 3 cable route between KP18.1 – 18.4, which is a 325m long and 7m wide (about 2300m²) corridor. Seagrass planting will require the following pre-requisites and follow-ups: A consolidated coarse sediment layer of approx. 20 - 30 cm thickness (engineered material), An execution plan, prepared early enough to achieve the permit in time A permit by authorities (STALU VP, WSA Ostsee), Sufficient plant material seagrass shoots (subject to availability, see details below) to be suitable for planting a harbor nearby (either Thiessow (8km), Freest (11km) or Lubmin (15km)) shall be used for hand-over of seagrass shoots/geotextile ropes with seagrass from Third Party supplier In case it is required the work area per operational day shall be first marked by rods/subsurface buoys attached to small ground weights prior to planting to allow for correct planting spatially and regarding shoot density/m². In case of non-fins-diving solutions it can be done different. shifting of work site day by day shall be enabled by installation of a remote-controlled sub-surface marker buoy with release system on last position of executed work, respectively work executed on previous days shall be inspected by means of underwater video (ROV or UW-drone) repeatedly General assumptions about the task: Total impact area to be restored will be ~2.300m² Work can be executed by divers in accordance with the requirements of DGUV Regel 101-023. Alternatively work can be executed by ROV, if the Contractor can proof the suitability of the technology by references Seagrass planting shall start on 1st of June 2027 and has to be completed by 31st of July 2027. Employer considers two alternative planting methods: (1) planting of single shoots (2) Installation of rotable fabric ropes with incorporated shoots Suitable ropes ready for installation will be provided by an assigned manufacturer. Single shoot planting planting is the preferred procedure, but rope installation shall be implemented in parallel too. If you are interested in participating in the described procedure, please contact us by e-mail (andre.forbrig@50hertz.com) and express your interest in participating. With the expression of interest, we need the following information from you in order to be able to add you to the project in Ariba: - Full name of the company: - Address of the company: - V.A.T. Number: - Tax Number: - Commercial register number: In addition, I need the contact details of the people who you should have access to the Ariba system: - Name - E-mail address - Phone numberThe main target for this operation is the planting of seagrass, either as a single plant or/and as a rope consisting plants. Employer is requesting the Bidder to submit a quotation for the execution of seagrass planting works. The designated location for the seagrass planting is at Ostwind 3 cable route between KP18.1 – 18.4, which is a 325m long and 7m wide (about 2300m²) corridor. Seagrass planting will require the following pre-requisites and follow-ups: A consolidated coarse sediment layer of approx. 20 - 30 cm thickness (engineered material), An execution plan, prepared early enough to achieve the permit in time A permit by authorities (STALU VP, WSA Ostsee), Sufficient plant material seagrass shoots (subject to availability, see details below) to be suitable for planting a harbor nearby (either Thiessow (8km), Freest (11km) or Lubmin (15km)) shall be used for hand-over of seagrass shoots/geotextile ropes with seagrass from Third Party supplier In case it is required the work area per operational day shall be first marked by rods/subsurface buoys attached to small ground weights prior to planting to allow for correct planting spatially and regarding shoot density/m². In case of non-fins-diving solutions it can be done different. shifting of work site day by day shall be enabled by installation of a remote-controlled sub-surface marker buoy with release system on last position of executed work, respectively work executed on previous days shall be inspected by means of underwater video (ROV or UW-drone) repeatedly General assumptions about the task: Total impact area to be restored will be ~2.300m² Work can be executed by divers in accordance with the requirements of DGUV Regel 101-023. Alternatively work can be executed by ROV, if the Contractor can proof the suitability of the technology by references Seagrass planting shall start on 1st of June 2027 and has to be completed by 31st of July 2027. Employer considers two alternative planting methods: (1) planting of single shoots (2) Installation of rotable fabric ropes with incorporated shoots Suitable ropes ready for installation will be provided by an assigned manufacturer. Single shoot planting planting is the preferred procedure, but rope installation shall be implemented in parallel too. If you are interested in participating in the described procedure, please contact us by e-mail (andre.forbrig@50hertz.com) and express your interest in participating. With the expression of interest, we need the following information from you in order to be able to add you to the project in Ariba: - Full name of the company: - Address of the company: - V.A.T. Number: - Tax Number: - Commercial register number: In addition, I need the contact details of the people who you should have access to the Ariba system: - Name - E-mail address - Phone numberservicesfalsenone80000077310000Bodden KP18.1-KP18.4. (Greifswald)Bodden KP18.1-KP18.4. (Greifswald)DE80NDEU2027-04-01+02:002027-10-31+02:001