1. Comprador
1.1.
Comprador
Denominación oficial: INNLANDET FYLKESKOMMUNE
Naturaleza jurídica del comprador: Autoridad regional
Actividad del poder adjudicador: Servicios públicos generales
2. Procedimiento
2.1.
Procedimiento
Título: System for Geotechnical data acquisition and data visualisation.
Descripción: This is a Request for Information (RFI) with the purpose of mapping available systems and suppliers for a cloud based system for geotechnical data acquisition and visualisation. The RFI is not a competition, but an information acquisition that can form the basis for any future procurement. Response deadline: 22 September 2025System for Geotechnical data acquisition and data visualisationWe would like to procure a cloud based platform that supports and simplifies the entire process around ground surveys, geotechnical data acquisition and data visualisation. The system must safeguard interaction between the county and external cooperation partners (primarily test drilling partners). If not otherwise mentioned, the system must be able to function without the use of other tools (AutoCAD and equivalent). The system must have the following main functions: Create a ground survey plan with drill holes and other types of ground surveys, directly on a map. Information from the ground survey plan must be easily shared with contractors who carry out the ground surveys in the field, via this cloud based platform. The contractor will then be given access to visually see the drill plan on detailed maps equivalent to the Norwegian map or aerial photos. The contractor must easily be able to share both data and visual results from the ground surveys back to the county via this platform, without the results having to be loaded into other software. The information from the ground surveys must be easily changed on this cloud based platform, so that, for example, the geotechnical executive officer can easily adjust/add level of layer surfaces as needed (marsh, different types of uncompacted matter, rock). Result files from the ground surveys (STD files etc.) must be compatible with other widely used geotechnical software. Making KOF files or equivalent of height level for layer surfaces (bog, different types of uncompacted matter, rock), which are otherwise defined by test drills and/or geotechnical case manager. Making geotechnical V-drawings that fulfil the requirements for handbook N200. This applies to an overview map for the placement of the ground surveys together with terrain level, depth to rock, existing terrain and plans for development (planned road/measures). The tool shall be usable without requirement for other tools such as. The AutoCAD system ought to be able to: Create geotechnical V-drawings with length profiles and cross profiles of drilling, road and terrain, without the use of other tools. If this cannot be done, an interactive system against other software (AutoCAD or equivalent) will nevertheless give a value. Import data from laboratory surveys (grain distribution, water content, cutting strength etc.) so that, for example, these can be viewed on, for example, cross profiles. Export data to NADAG. It is important that the system is user friendly for both geotechnical case workers, test drillers and field coordinators. Estimated need for simultaneous usersIt is estimated need for up to 10 simultaneous users in the system. This includes approx. 5 internal users from the county, as well as up to 5 external users with editing access, typically from test drilling companies and geotechnical consultants. It ought to be possible to adjust the number of licences up or down based on actual need over time, so that the system is flexible and cost efficient.
Identificador interno: 2025/18969
2.1.1.
Finalidad
Naturaleza del contrato: Servicios
Clasificación principal (cpv): 72212326 Servicios de desarrollo de software cartográfico
Clasificación adicional (cpv): 48100000 Paquetes de software específico de un sector económico, 48150000 Paquetes de software de control industrial, 48326000 Paquetes de software cartográfico, 48326100 Sistema de cartografía digital, 48614000 Sistema de recopilación de datos, 48730000 Paquetes de software de seguridad, 48780000 Paquetes de software de gestión de sistemas, almacenamiento y contenido, 71332000 Servicios de ingeniería geotécnica, 71351914 Servicios arqueológicos, 72200000 Servicios de programación de software y de consultoría, 72227000 Servicios de consultoría en integración de software, 72316000 Servicios de análisis de datos, 72320000 Servicios relacionados con bases de datos
2.1.2.
Lugar de ejecución
Subdivisión del país (NUTS): Innlandet (NO020)
País: Noruega
2.1.3.
Valor
Valor estimado, IVA excluido: 500 000,00 NOK
2.1.4.
Información general
Base jurídica:
Directiva 2014/24/UE
Anskaffelsesforskriften - RFI - Request for information.
3. Parte
3.1.
Parte: PAR-0000
Título: System for Geotechnical data acquisition and data visualisation.
Descripción: This is a Request for Information (RFI) with the purpose of mapping available systems and suppliers for a cloud based system for geotechnical data acquisition and visualisation. The RFI is not a competition, but an information acquisition that can form the basis for any future procurement. Response deadline: 22 September 2025System for Geotechnical data acquisition and data visualisationWe would like to procure a cloud based platform that supports and simplifies the entire process around ground surveys, geotechnical data acquisition and data visualisation. The system must safeguard interaction between the county and external cooperation partners (primarily test drilling partners). If not otherwise mentioned, the system must be able to function without the use of other tools (AutoCAD and equivalent). The system must have the following main functions: Create a ground survey plan with drill holes and other types of ground surveys, directly on a map. Information from the ground survey plan must be easily shared with contractors who carry out the ground surveys in the field, via this cloud based platform. The contractor will then be given access to visually see the drill plan on detailed maps equivalent to the Norwegian map or aerial photos. The contractor must easily be able to share both data and visual results from the ground surveys back to the county via this platform, without the results having to be loaded into other software. The information from the ground surveys must be easily changed on this cloud based platform, so that, for example, the geotechnical executive officer can easily adjust/add level of layer surfaces as needed (marsh, different types of uncompacted matter, rock). Result files from the ground surveys (STD files etc.) must be compatible with other widely used geotechnical software. Making KOF files or equivalent of height level for layer surfaces (bog, different types of uncompacted matter, rock), which are otherwise defined by test drills and/or geotechnical case manager. Making geotechnical V-drawings that fulfil the requirements for handbook N200. This applies to an overview map for the placement of the ground surveys together with terrain level, depth to rock, existing terrain and plans for development (planned road/measures). The tool shall be usable without requirement for other tools such as. The AutoCAD system ought to be able to: Create geotechnical V-drawings with length profiles and cross profiles of drilling, road and terrain, without the use of other tools. If this cannot be done, an interactive system against other software (AutoCAD or equivalent) will nevertheless give a value. Import data from laboratory surveys (grain distribution, water content, cutting strength etc.) so that, for example, these can be viewed on, for example, cross profiles. Export data to NADAG. It is important that the system is user friendly for both geotechnical case workers, test drillers and field coordinators. Estimated need for simultaneous usersIt is estimated need for up to 10 simultaneous users in the system. This includes approx. 5 internal users from the county, as well as up to 5 external users with editing access, typically from test drilling companies and geotechnical consultants. It ought to be possible to adjust the number of licences up or down based on actual need over time, so that the system is flexible and cost efficient.
Identificador interno: 2025/18969
3.1.1.
Finalidad
Naturaleza del contrato: Servicios
Clasificación principal (cpv): 72212326 Servicios de desarrollo de software cartográfico
Clasificación adicional (cpv): 48100000 Paquetes de software específico de un sector económico
Clasificación adicional (cpv): 48150000 Paquetes de software de control industrial
Clasificación adicional (cpv): 48326000 Paquetes de software cartográfico
Clasificación adicional (cpv): 48326100 Sistema de cartografía digital
Clasificación adicional (cpv): 48614000 Sistema de recopilación de datos
Clasificación adicional (cpv): 48730000 Paquetes de software de seguridad
Clasificación adicional (cpv): 48780000 Paquetes de software de gestión de sistemas, almacenamiento y contenido
Clasificación adicional (cpv): 71332000 Servicios de ingeniería geotécnica
Clasificación adicional (cpv): 71351914 Servicios arqueológicos
Clasificación adicional (cpv): 72200000 Servicios de programación de software y de consultoría
Clasificación adicional (cpv): 72227000 Servicios de consultoría en integración de software
Clasificación adicional (cpv): 72316000 Servicios de análisis de datos
Clasificación adicional (cpv): 72320000 Servicios relacionados con bases de datos
3.1.2.
Lugar de ejecución
Subdivisión del país (NUTS): Innlandet (NO020)
País: Noruega
3.1.4.
Valor
Valor estimado, IVA excluido: 500 000,00 NOK
3.1.5.
Información general
Participación reservada:
La participación no está reservada.
La contratación pública está cubierta por el Acuerdo sobre Contratación Pública (ACP): no
3.1.6.
Pliegos de contratación
Lenguas en las que los pliegos de contratación están disponibles oficialmente: noruego
3.1.7.
Condiciones de la contratación pública
La ejecución del contrato debe realizarse en el marco de programas de empleo protegido: No
3.1.9.
Información adicional, mediación y recurso
Organización encargada de los procedimientos de recurso: Hedmarken og Østerdal tingrett
8. Organizaciones
8.1.
ORG-0001
Denominación oficial: INNLANDET FYLKESKOMMUNE
Número de registro: 920717152
Dirección postal: Parkgata 64
Localidad: HAMAR
Código postal: 2317
Subdivisión del país (NUTS): Innlandet (NO020)
País: Noruega
Punto de contacto: Samuel Andersen
Teléfono: +4740044442
Funciones de esta organización:
Comprador
8.1.
ORG-0002
Denominación oficial: Hedmarken og Østerdal tingrett
Número de registro: 935364892
Localidad: Hamar
Código postal: 2326
Subdivisión del país (NUTS): Innlandet (NO020)
País: Noruega
Funciones de esta organización:
Organización encargada de los procedimientos de recurso
Identificador/versión del anuncio: cff44e05-def5-48b1-9904-a7c6be762134 - 01
Tipo de formulario: Planificación
Tipo de anuncio: Anuncio de información previa o anuncio periódico indicativo usado únicamente para información
Subtipo de anuncio: 4
Fecha de envío del anuncio: 01/09/2025 12:51:54 (UTC+00:00) Hora de Europa Occidental, GMT
Anuncio: fecha de envío (por parte del eSender): 01/09/2025 13:37:08 (UTC+00:00) Hora de Europa Occidental, GMT
Lenguas en las que este anuncio está disponible oficialmente: inglés
Número de publicación del anuncio: 574404-2025
Número de la edición del DO S: 168/2025
Fecha de publicación: 03/09/2025
Fecha prevista de publicación de un anuncio de licitación en el marco del presente procedimiento: 01/12/2025