1. Hankija
1.1.
Hankija
Ametlik nimi: INNLANDET FYLKESKOMMUNE
Hankija õiguslik vorm: Piirkondlik omavalitsus
Hankija tegevus: Üldised avalikud teenused
2. Menetlus
2.1.
Menetlus
Pealkiri: System for Geotechnical data acquisition and data visualisation.
Kirjeldus: This is a Request for Information (RFI) with the purpose of mapping available systems and suppliers for a cloud based system for geotechnical data acquisition and visualisation. The RFI is not a competition, but an information acquisition that can form the basis for any future procurement. Response deadline: 22 September 2025System for Geotechnical data acquisition and data visualisationWe would like to procure a cloud based platform that supports and simplifies the entire process around ground surveys, geotechnical data acquisition and data visualisation. The system must safeguard interaction between the county and external cooperation partners (primarily test drilling partners). If not otherwise mentioned, the system must be able to function without the use of other tools (AutoCAD and equivalent). The system must have the following main functions: Create a ground survey plan with drill holes and other types of ground surveys, directly on a map. Information from the ground survey plan must be easily shared with contractors who carry out the ground surveys in the field, via this cloud based platform. The contractor will then be given access to visually see the drill plan on detailed maps equivalent to the Norwegian map or aerial photos. The contractor must easily be able to share both data and visual results from the ground surveys back to the county via this platform, without the results having to be loaded into other software. The information from the ground surveys must be easily changed on this cloud based platform, so that, for example, the geotechnical executive officer can easily adjust/add level of layer surfaces as needed (marsh, different types of uncompacted matter, rock). Result files from the ground surveys (STD files etc.) must be compatible with other widely used geotechnical software. Making KOF files or equivalent of height level for layer surfaces (bog, different types of uncompacted matter, rock), which are otherwise defined by test drills and/or geotechnical case manager. Making geotechnical V-drawings that fulfil the requirements for handbook N200. This applies to an overview map for the placement of the ground surveys together with terrain level, depth to rock, existing terrain and plans for development (planned road/measures). The tool shall be usable without requirement for other tools such as. The AutoCAD system ought to be able to: Create geotechnical V-drawings with length profiles and cross profiles of drilling, road and terrain, without the use of other tools. If this cannot be done, an interactive system against other software (AutoCAD or equivalent) will nevertheless give a value. Import data from laboratory surveys (grain distribution, water content, cutting strength etc.) so that, for example, these can be viewed on, for example, cross profiles. Export data to NADAG. It is important that the system is user friendly for both geotechnical case workers, test drillers and field coordinators. Estimated need for simultaneous usersIt is estimated need for up to 10 simultaneous users in the system. This includes approx. 5 internal users from the county, as well as up to 5 external users with editing access, typically from test drilling companies and geotechnical consultants. It ought to be possible to adjust the number of licences up or down based on actual need over time, so that the system is flexible and cost efficient.
Sisemine tunnus: 2025/18969
2.1.1.
Eesmärk
Lepingu olemus: Teenused
Peamine liigitus (cpv): 72212326 Vormide loomise tarkvara arendusteenused
Täiendav liigitus (cpv): 48100000 Tööstusliku tarkvara pakett, 48150000 Tööstusjuhtimise tarkvarapakett, 48326000 Kaardistamistarkvarapakett, 48326100 Digitaalkartograafia, 48614000 Andmekogumissüsteemid, 48730000 Turvatarkvarapakett, 48780000 Süsteemi-, salvestus- ja sisuhalduse tarkvarapakett, 71332000 Geotehnilised teenused, 71351914 Arheoloogilised teenused, 72200000 Tarkvara programmeerimis- ja nõustamisteenused, 72227000 Tarkvara integreerimise nõustamisteenused, 72316000 Andmete analüüsiteenused, 72320000 Andmebaasiteenused
2.1.2.
Lepingu täitmise koht
Riik – jaotus (NUTS): Innlandet (NO020)
Riik: Norra
2.1.3.
Maksumus
Eeldatav maksumus käibemaksuta: 500 000,00 NOK
2.1.4.
Üldine teave
Õiguslik alus:
Direktiiv 2014/24/EL
Anskaffelsesforskriften - RFI - Request for information.
3. Osa
3.1.
Osa: PAR-0000
Pealkiri: System for Geotechnical data acquisition and data visualisation.
Kirjeldus: This is a Request for Information (RFI) with the purpose of mapping available systems and suppliers for a cloud based system for geotechnical data acquisition and visualisation. The RFI is not a competition, but an information acquisition that can form the basis for any future procurement. Response deadline: 22 September 2025System for Geotechnical data acquisition and data visualisationWe would like to procure a cloud based platform that supports and simplifies the entire process around ground surveys, geotechnical data acquisition and data visualisation. The system must safeguard interaction between the county and external cooperation partners (primarily test drilling partners). If not otherwise mentioned, the system must be able to function without the use of other tools (AutoCAD and equivalent). The system must have the following main functions: Create a ground survey plan with drill holes and other types of ground surveys, directly on a map. Information from the ground survey plan must be easily shared with contractors who carry out the ground surveys in the field, via this cloud based platform. The contractor will then be given access to visually see the drill plan on detailed maps equivalent to the Norwegian map or aerial photos. The contractor must easily be able to share both data and visual results from the ground surveys back to the county via this platform, without the results having to be loaded into other software. The information from the ground surveys must be easily changed on this cloud based platform, so that, for example, the geotechnical executive officer can easily adjust/add level of layer surfaces as needed (marsh, different types of uncompacted matter, rock). Result files from the ground surveys (STD files etc.) must be compatible with other widely used geotechnical software. Making KOF files or equivalent of height level for layer surfaces (bog, different types of uncompacted matter, rock), which are otherwise defined by test drills and/or geotechnical case manager. Making geotechnical V-drawings that fulfil the requirements for handbook N200. This applies to an overview map for the placement of the ground surveys together with terrain level, depth to rock, existing terrain and plans for development (planned road/measures). The tool shall be usable without requirement for other tools such as. The AutoCAD system ought to be able to: Create geotechnical V-drawings with length profiles and cross profiles of drilling, road and terrain, without the use of other tools. If this cannot be done, an interactive system against other software (AutoCAD or equivalent) will nevertheless give a value. Import data from laboratory surveys (grain distribution, water content, cutting strength etc.) so that, for example, these can be viewed on, for example, cross profiles. Export data to NADAG. It is important that the system is user friendly for both geotechnical case workers, test drillers and field coordinators. Estimated need for simultaneous usersIt is estimated need for up to 10 simultaneous users in the system. This includes approx. 5 internal users from the county, as well as up to 5 external users with editing access, typically from test drilling companies and geotechnical consultants. It ought to be possible to adjust the number of licences up or down based on actual need over time, so that the system is flexible and cost efficient.
Sisemine tunnus: 2025/18969
3.1.1.
Eesmärk
Lepingu olemus: Teenused
Peamine liigitus (cpv): 72212326 Vormide loomise tarkvara arendusteenused
Täiendav liigitus (cpv): 48100000 Tööstusliku tarkvara pakett
Täiendav liigitus (cpv): 48150000 Tööstusjuhtimise tarkvarapakett
Täiendav liigitus (cpv): 48326000 Kaardistamistarkvarapakett
Täiendav liigitus (cpv): 48326100 Digitaalkartograafia
Täiendav liigitus (cpv): 48614000 Andmekogumissüsteemid
Täiendav liigitus (cpv): 48730000 Turvatarkvarapakett
Täiendav liigitus (cpv): 48780000 Süsteemi-, salvestus- ja sisuhalduse tarkvarapakett
Täiendav liigitus (cpv): 71332000 Geotehnilised teenused
Täiendav liigitus (cpv): 71351914 Arheoloogilised teenused
Täiendav liigitus (cpv): 72200000 Tarkvara programmeerimis- ja nõustamisteenused
Täiendav liigitus (cpv): 72227000 Tarkvara integreerimise nõustamisteenused
Täiendav liigitus (cpv): 72316000 Andmete analüüsiteenused
Täiendav liigitus (cpv): 72320000 Andmebaasiteenused
3.1.2.
Lepingu täitmise koht
Riik – jaotus (NUTS): Innlandet (NO020)
Riik: Norra
3.1.4.
Maksumus
Eeldatav maksumus käibemaksuta: 500 000,00 NOK
3.1.5.
Üldine teave
Reserveeritud osalemine:
Osalemine ei ole reserveeritud.
Hanke suhtes kohaldatakse riigihankelepingut (GPA): ei
3.1.6.
Hankedokumendid
Keeled, milles hankedokumendid on ametlikult kättesaadavad: norra keel
3.1.7.
Hanke tingimused
Lepingu täitmine peab toimuma kaitstud tööhõive programmide raames: Ei
3.1.9.
Lisateave, lepitus ja vaidlustus
Vaidlustusorgan: Hedmarken og Østerdal tingrett
8. Organisatsioonid
8.1.
ORG-0001
Ametlik nimi: INNLANDET FYLKESKOMMUNE
Registreerimisnumber: 920717152
Postiaadress: Parkgata 64
Linn: HAMAR
Sihtnumber: 2317
Riik – jaotus (NUTS): Innlandet (NO020)
Riik: Norra
Kontaktpunkt: Samuel Andersen
Telefon: +4740044442
Selle organisatsiooni rollid:
Hankija
8.1.
ORG-0002
Ametlik nimi: Hedmarken og Østerdal tingrett
Registreerimisnumber: 935364892
Linn: Hamar
Sihtnumber: 2326
Riik – jaotus (NUTS): Innlandet (NO020)
Riik: Norra
Selle organisatsiooni rollid:
Vaidlustusorgan
Teate tunnus/versioon: cff44e05-def5-48b1-9904-a7c6be762134 - 01
Vormi liik: Kavandamine
Teate liik: Ainult teavitamise eesmärgil kasutatav eelteade või perioodiline eelteade
Teate alaliik: 4
Teate saatmise kuupäev: 01/09/2025 12:51:54 (UTC+00:00) Lääne-Euroopa aeg, Greenwichi aeg
Teate saatmise kuupäev (eSender): 01/09/2025 13:37:08 (UTC+00:00) Lääne-Euroopa aeg, Greenwichi aeg
Keeled, milles käesolev teade on ametlikult kättesaadav: inglise keel
Teate avaldamise number: 574404-2025
ELT S väljaande number: 168/2025
Avaldamise kuupäev: 03/09/2025
Hanketeate avaldamise eeldatav avaldamiskuupäev kõnealuses menetluses: 01/12/2025