1. Xerrej
1.1.
Xerrej
Isem uffiċjali: INNLANDET FYLKESKOMMUNE
Tip legali tax-xerrej: Awtorità reġjonali
Attività tal-awtorità kontraenti: Servizzi publiċi ġenerali
2. Proċedura
2.1.
Proċedura
Titlu: System for Geotechnical data acquisition and data visualisation.
Deskrizzjoni: This is a Request for Information (RFI) with the purpose of mapping available systems and suppliers for a cloud based system for geotechnical data acquisition and visualisation. The RFI is not a competition, but an information acquisition that can form the basis for any future procurement. Response deadline: 22 September 2025System for Geotechnical data acquisition and data visualisationWe would like to procure a cloud based platform that supports and simplifies the entire process around ground surveys, geotechnical data acquisition and data visualisation. The system must safeguard interaction between the county and external cooperation partners (primarily test drilling partners). If not otherwise mentioned, the system must be able to function without the use of other tools (AutoCAD and equivalent). The system must have the following main functions: Create a ground survey plan with drill holes and other types of ground surveys, directly on a map. Information from the ground survey plan must be easily shared with contractors who carry out the ground surveys in the field, via this cloud based platform. The contractor will then be given access to visually see the drill plan on detailed maps equivalent to the Norwegian map or aerial photos. The contractor must easily be able to share both data and visual results from the ground surveys back to the county via this platform, without the results having to be loaded into other software. The information from the ground surveys must be easily changed on this cloud based platform, so that, for example, the geotechnical executive officer can easily adjust/add level of layer surfaces as needed (marsh, different types of uncompacted matter, rock). Result files from the ground surveys (STD files etc.) must be compatible with other widely used geotechnical software. Making KOF files or equivalent of height level for layer surfaces (bog, different types of uncompacted matter, rock), which are otherwise defined by test drills and/or geotechnical case manager. Making geotechnical V-drawings that fulfil the requirements for handbook N200. This applies to an overview map for the placement of the ground surveys together with terrain level, depth to rock, existing terrain and plans for development (planned road/measures). The tool shall be usable without requirement for other tools such as. The AutoCAD system ought to be able to: Create geotechnical V-drawings with length profiles and cross profiles of drilling, road and terrain, without the use of other tools. If this cannot be done, an interactive system against other software (AutoCAD or equivalent) will nevertheless give a value. Import data from laboratory surveys (grain distribution, water content, cutting strength etc.) so that, for example, these can be viewed on, for example, cross profiles. Export data to NADAG. It is important that the system is user friendly for both geotechnical case workers, test drillers and field coordinators. Estimated need for simultaneous usersIt is estimated need for up to 10 simultaneous users in the system. This includes approx. 5 internal users from the county, as well as up to 5 external users with editing access, typically from test drilling companies and geotechnical consultants. It ought to be possible to adjust the number of licences up or down based on actual need over time, so that the system is flexible and cost efficient.
Identifikatur intern: 2025/18969
2.1.1.
Għan
Natura tal-kuntratt: Servizzi
Klassifikazzjoni prinċipali (cpv): 72212326 Servizzi ta' żvilupp ta' softwer għall-immappjar
Klassifikazzjoni addizzjonali (cpv): 48100000 Pakkett ta-softwer speċifiku għall-industrija, 48150000 Pakkett ta' softwer għall-kontroll industrijali, 48326000 Pakkett ta' softwer għall-immappjar, 48326100 Sistema ta’ l-immappjar diġitali, 48614000 Sistema ta’ l-akkwist tad-data, 48730000 Pakkett ta' softwer għas-sigurtà, 48780000 Pakkett ta' softwer għall-ġestjoni tas-sistema, il-ħżin u l-kontenut, 71332000 Servizzi ta' l-inġinerija ġeoteknika, 71351914 Servizzi arkeoloġiċi, 72200000 Servizzi ta' konsulenza dwar il-programmizzar tas-software, 72227000 Servizzi ta' konsulenza dwar l-integrazzjoni tas-software, 72316000 Servizzi ta' analiżi dwar id-data, 72320000 Servizzi ta' database
2.1.2.
Post tal-prestazzjoni
Sottodiviżjoni tal-pajjiż (NUTS): Innlandet (NO020)
Pajjiż: In-Norveġja
2.1.3.
Valur
Valur stmat mingħajr VAT: 500 000,00 NOK
2.1.4.
Informazzjoni ġenerali
Bażi legali:
Direttiva 2014/24/UE
Anskaffelsesforskriften - RFI - Request for information.
3. Parti
3.1.
Parti: PAR-0000
Titlu: System for Geotechnical data acquisition and data visualisation.
Deskrizzjoni: This is a Request for Information (RFI) with the purpose of mapping available systems and suppliers for a cloud based system for geotechnical data acquisition and visualisation. The RFI is not a competition, but an information acquisition that can form the basis for any future procurement. Response deadline: 22 September 2025System for Geotechnical data acquisition and data visualisationWe would like to procure a cloud based platform that supports and simplifies the entire process around ground surveys, geotechnical data acquisition and data visualisation. The system must safeguard interaction between the county and external cooperation partners (primarily test drilling partners). If not otherwise mentioned, the system must be able to function without the use of other tools (AutoCAD and equivalent). The system must have the following main functions: Create a ground survey plan with drill holes and other types of ground surveys, directly on a map. Information from the ground survey plan must be easily shared with contractors who carry out the ground surveys in the field, via this cloud based platform. The contractor will then be given access to visually see the drill plan on detailed maps equivalent to the Norwegian map or aerial photos. The contractor must easily be able to share both data and visual results from the ground surveys back to the county via this platform, without the results having to be loaded into other software. The information from the ground surveys must be easily changed on this cloud based platform, so that, for example, the geotechnical executive officer can easily adjust/add level of layer surfaces as needed (marsh, different types of uncompacted matter, rock). Result files from the ground surveys (STD files etc.) must be compatible with other widely used geotechnical software. Making KOF files or equivalent of height level for layer surfaces (bog, different types of uncompacted matter, rock), which are otherwise defined by test drills and/or geotechnical case manager. Making geotechnical V-drawings that fulfil the requirements for handbook N200. This applies to an overview map for the placement of the ground surveys together with terrain level, depth to rock, existing terrain and plans for development (planned road/measures). The tool shall be usable without requirement for other tools such as. The AutoCAD system ought to be able to: Create geotechnical V-drawings with length profiles and cross profiles of drilling, road and terrain, without the use of other tools. If this cannot be done, an interactive system against other software (AutoCAD or equivalent) will nevertheless give a value. Import data from laboratory surveys (grain distribution, water content, cutting strength etc.) so that, for example, these can be viewed on, for example, cross profiles. Export data to NADAG. It is important that the system is user friendly for both geotechnical case workers, test drillers and field coordinators. Estimated need for simultaneous usersIt is estimated need for up to 10 simultaneous users in the system. This includes approx. 5 internal users from the county, as well as up to 5 external users with editing access, typically from test drilling companies and geotechnical consultants. It ought to be possible to adjust the number of licences up or down based on actual need over time, so that the system is flexible and cost efficient.
Identifikatur intern: 2025/18969
3.1.1.
Għan
Natura tal-kuntratt: Servizzi
Klassifikazzjoni prinċipali (cpv): 72212326 Servizzi ta' żvilupp ta' softwer għall-immappjar
Klassifikazzjoni addizzjonali (cpv): 48100000 Pakkett ta-softwer speċifiku għall-industrija
Klassifikazzjoni addizzjonali (cpv): 48150000 Pakkett ta' softwer għall-kontroll industrijali
Klassifikazzjoni addizzjonali (cpv): 48326000 Pakkett ta' softwer għall-immappjar
Klassifikazzjoni addizzjonali (cpv): 48326100 Sistema ta’ l-immappjar diġitali
Klassifikazzjoni addizzjonali (cpv): 48614000 Sistema ta’ l-akkwist tad-data
Klassifikazzjoni addizzjonali (cpv): 48730000 Pakkett ta' softwer għas-sigurtà
Klassifikazzjoni addizzjonali (cpv): 48780000 Pakkett ta' softwer għall-ġestjoni tas-sistema, il-ħżin u l-kontenut
Klassifikazzjoni addizzjonali (cpv): 71332000 Servizzi ta' l-inġinerija ġeoteknika
Klassifikazzjoni addizzjonali (cpv): 71351914 Servizzi arkeoloġiċi
Klassifikazzjoni addizzjonali (cpv): 72200000 Servizzi ta' konsulenza dwar il-programmizzar tas-software
Klassifikazzjoni addizzjonali (cpv): 72227000 Servizzi ta' konsulenza dwar l-integrazzjoni tas-software
Klassifikazzjoni addizzjonali (cpv): 72316000 Servizzi ta' analiżi dwar id-data
Klassifikazzjoni addizzjonali (cpv): 72320000 Servizzi ta' database
3.1.2.
Post tal-prestazzjoni
Sottodiviżjoni tal-pajjiż (NUTS): Innlandet (NO020)
Pajjiż: In-Norveġja
3.1.4.
Valur
Valur stmat mingħajr VAT: 500 000,00 NOK
3.1.5.
Informazzjoni ġenerali
Parteċipazzjoni riżervata:
Il-parteċipazzjoni mhijiex riżervata.
L-akkwist huwa kopert mill-Ftehim dwar l-Akkwisti Pubbliċi (GPA): le
3.1.6.
Dokumenti tal-akkwist
Lingwi li bihom id-dokumenti tal-akkwist huma disponibbli uffiċjalment: Norveġiż
3.1.7.
Termini tal-akkwist
L-eżekuzzjoni tal-kuntratt għandha titwettaq fil-qafas ta’ programmi ta’ impjiegi protetti: Le
3.1.9.
Aktar informazzjoni, medjazzjoni u rieżami
Organizzazzjoni tar-rieżami: Hedmarken og Østerdal tingrett
8. Organizzazzjonijiet
8.1.
ORG-0001
Isem uffiċjali: INNLANDET FYLKESKOMMUNE
Numru tar-reġistrazzjoni: 920717152
Indirizz postali: Parkgata 64
Belt: HAMAR
Kodiċi postali: 2317
Sottodiviżjoni tal-pajjiż (NUTS): Innlandet (NO020)
Pajjiż: In-Norveġja
Punt ta’ kuntatt: Samuel Andersen
Telefown: +4740044442
Rwoli ta’ din l-organizzazzjoni:
Xerrej
8.1.
ORG-0002
Isem uffiċjali: Hedmarken og Østerdal tingrett
Numru tar-reġistrazzjoni: 935364892
Belt: Hamar
Kodiċi postali: 2326
Sottodiviżjoni tal-pajjiż (NUTS): Innlandet (NO020)
Pajjiż: In-Norveġja
Rwoli ta’ din l-organizzazzjoni:
Organizzazzjoni tar-rieżami
Identifikatur/verżjoni tal-avviż: cff44e05-def5-48b1-9904-a7c6be762134 - 01
Tip ta’ formola: Ippjanar
Tip ta’ avviż: Avviż informattiv minn qabel jew avviż indikattiv perjodiku użat biss għall-informazzjoni
Sottotip tal-avviż: 4
Data ta’ meta ntbagħat l-avviż: 01/09/2025 12:51:54 (UTC+00:00) Ħin tal-Ewropa tal-Punent, GMT
Data tad-dispaċċ tal-avviż (eSender): 01/09/2025 13:37:08 (UTC+00:00) Ħin tal-Ewropa tal-Punent, GMT
Lingwi li bihom dan l-avviż huwa disponibbli uffiċjalment: Ingliż
Numru tal-pubblikazzjoni tal-avviż: 574404-2025
Numru tal-ħarġa tal-ĠU S: 168/2025
Data tal-pubblikazzjoni: 03/09/2025
Data stmata tal-pubblikazzjoni ta’ avviż ta’ kuntratt f’din il-proċedura: 01/12/2025