Help us improve the TED website by filling out our short survey!
United Kingdom-Romford: Construction work
Section I: Contracting authority
Main address: www.capitalesourcing.com
Section II: Object
Beam Parkway Major Scheme
Reconfiguration of A1306 dual carriageway to a single carriageway road and linear park from the Borough boundary at the Beam River Bridge to Dovers Corner Roundabout (junction with bridge road), including entries to all side roads; Marsh Way between the A1306 and the A13 and the B1335 Bridge Road between the A1306 and Lamson Road roundabout. The project also includes verge and some forecourts on either side of these roads.
South Hornchurch and Rainham, Essex, UNITED KINGDOM.
The project comprises the reconfiguration of the A1306 New Road dual carriageway between the River Beam and Dovers Corner roundabout to a largely single carriageway road and linear park, in support of the adjoining Beam Park housing zone. Following opening of the A13 to the south in 1999, New Road was de-trunked, with work including some narrowing of the A1306, removal of subways, upgraded lighting, some tree planting and introduction of bus lanes.
Now, as the industrial areas surrounding the A1306 are redeveloped to provide housing, LB Havering has developed an ambitious scheme to further reduce the impact of the road, by converting most of the remainder of the corridor to single carriageway and by developing a linear park including (but not limited to) carriageway works, landscaping, pedestrian and cycle routes, sustainable drainage including Swales, new lighting, public art, utility works, modifications to traffic signal junctions and to other junctions. Please refer to the tender documents, for further information.
The Contracting Authority is seeking to engage a suitably qualified and experienced contractor to develop the Contracting Authority's current design to a fully detailed design, and then to implement the scheme. The scheme is funded through Transport for London's Major Schemes/Liveable Neighbourhoods programme and the successful contractor will be expected to demonstrate relevant experience in working with the public sector to deliver a successful scheme. We would expect the successful contractor to carry out community and stakeholder engagement and obtain relevant consents. Further details can be obtained from the tender pack at the internet address provided in Section I.2).
There is a 'Meet the Buyer' day planned for 3.7.2019. To register your attendance, please complete the form at Section 1 — Selection Questionnaire — Appendix C Meet the Buyer. Please send this to us via the CapitaleSourcing messaging board.
Please note, all tender documents are available via CapitalEsourcing. However, due to the various file sizes of the Part 5 site information, these files are only available through a link supplied by the Client. Please send a message to the client through CapitalEsourcing providing the details of the lead contact name and your organisation using the form at ‘Part 5 Site information access request’ form, found in the attachment area. You will then be sent a link to enable your company to download the files.
The overall contract completion date will be after the 24 month defect liability period.
Refer to guidance notes with the supplier questionnaire.
Section III: Legal, economic, financial and technical information
Further details can be obtained from the tender pack found at the internet address provided in Section I.2).
Performance Indicators are contained within the tender document at the internet address provided in Section I.2).
Section IV: Procedure
Section VI: Complementary information
The Contracting Authority is seeking to deliver a transformative scheme for the A1306 which will create 'Beam Parkway’ — a new boulevard including road, footpaths, cycleway, connective green infrastructure, public art, and leisure and amenity space — in place of the existing carriageway.
This scheme will underpin the wider Housing Zone development, integrating the incoming and existing communities and providing accessible transport routes and public space.
Consultation with local stakeholders, businesses and residents has been ongoing since 2015.
To facilitate the construction of Beam Parkway, the Contracting Authority wishes to commission an experienced principal contractor to deliver the work, responsible for subcontracts where necessary to provide a coherent multidisciplinary team.
The appointed contractor will have overall responsibility for the construction programme management, which will involve project managing a range of multifaceted tasks and objectives. It is expected that the successful contractor will have a turnover of at least 20 000 000 GBP. Financial assessments will be carried out, the full details of which can be found in the tender pack.
The contractor will be required to:
1) Review proposed scheme design and feasibility work already undertaken, in order to validate information included and confirm viability and deliverability;
2) Develop the current design to a full detailed design and specification in accordance with the employer’s requirements and obtain technical approvals set down within the scope;
3) Develop a viable approach for construction delivery, taking into account timescales and proposals for surrounding housing development; traffic management proposals and other constraints set down in the contract documents, including options for prioritising different areas of development which can be adjusted according to housing delivery starts on site;
4) Develop and manage the contract programme in accordance with the requirements of the chosen Form of Contract — NEC4;
5) Support project/programme communications, enabling and maintain open channels of communication throughout the project lifetime which consistently reflect key messages;
6) Carry out project reporting across a range of formats, ensuring regular and relevant updates and briefings for all team members and stakeholders, internally and externally;
7) Undertake risk management, identifying, assessing and mitigating project risks to ensure the programme is delivered on time and within budget;
8) Establish a project cost plan, including an assessment of additional funding options which may be available;
9) Identify and commission any additional surveys required to inform completion of the project;
10) Construct the works in accordance with the approved detailed design and specifications and other requirements set out above.
In order to fulfil these requirements, the appointed contractor will need to have experience in other relevant large scale, multi-disciplinary transformation projects. Full details regarding the tender process are included in the tender pack.
Non-compliant tenders will not be considered or acknowledged. The Contracting Authority expressly reserves the right:
(i) not to award any contract as a result of the procurement process related to the publication of this contract notice; and
(ii) to make whatever changes it may deem fit to the content and structure of the procurement (to the extent permitted under the Public Contract Regulations 2015).
The Contracting Authority shall not be liable for any costs incurred by bidders in connection with the procurement process. Any expenditure, work or effort undertaken prior to contract award is a matter solely for the commercial judgement of the bidder.
To express interest in this tender you must register and log in to CapitalESourcing. You can express interest in this pre-qualification questionnaire (PQQ) by clicking on the appropriate link under ‘PQQs/RFQ/ITTs Open To All suppliers’.
In accordance with Regulation 86 and 87 of the Public Contracts Regulations 2015, the Contracting Authority has incorporated a minimum 10 calendar days standstill period starting from the day that bidders are notified of the contract award. Unsuccessful bidders will be provided with a de-brief of the award decision at the start of the standstill period including details of their bid in relation to the winning bid(s) comprising:
— the reasons for the decision,
— the characteristics and relative advantages of the successful tender(s),
— the score and name of the economic operator(s) to be awarded the contract.
Bidders have the right to appeal as provided for within the Public Contract Regulations 2015. Any such proceedings must be brought before the High Court of England and Wales.